Examples of 'thickness gauge' in a sentence
Meaning of "thickness gauge"
A thickness gauge is a measuring instrument used to determine the thickness or the distance between two surfaces of an object. It is commonly used in various industries such as metalworking, automotive, manufacturing, and construction to ensure quality control and precise measurements
How to use "thickness gauge" in a sentence
Basic
Advanced
thickness gauge
Thickness of each thickness gauge is marked thereon.
Technical specifications of the twine thickness gauge.
Check that the card thickness gauge is correctly adjusted.
Measure the electrode distance by means of a thickness gauge.
The card thickness gauge is underneath the card feeder.
Check the card thickness gauge.
This type of measurement is typically performed with an ultrasonic thickness gauge.
Beta ray thickness gauge.
The groove on the die holder acts as a thickness gauge.
Gamma ray thickness gauge.
Weight was applied to the measuring plunger of the thickness gauge.
Use of thickness gauge.
Measure the space between the electrodes with a thickness gauge.
A pipe wall thickness gauge or pipe tables can be used for this.
Selection of the twine thickness gauge.
See also
This describes a coating thickness gauge for measuring the thickness of a coating of protein on a substrate.
Wet film thickness is determined using a wet film thickness gauge.
The groove on the die holder acts as a thickness gauge for allowable cutting thickness.
The thickness of the film was measured using a digital thickness gauge.
Shell thickness gauge to detect reduction in shell wall thickness due to elongation during expansion.
Check the smaller clearance with the thickness gauge and adjust it.
The thickness gauge was zeroed and the RF power turned on.
Check measurements after each cut with callipers or a digital thickness gauge.
Injection thicknesses were measured with a thickness gauge and injection widths were measured using a caliper.
Finally check the right thickness and regularity of the air gap with thickness gauge.
The groove in the die holder serve as the thickness gauge for allowable cutting thickness.
The thickness gauge used is of the Mitutoyo type or equivalent.
Measure the separation of the electrodes with a thickness gauge not provided.
Connect the thickness gauge to the PC using a USB cable.
Certain more refined systems also comprise a thickness gauge upstream of this stand.
Coating Thickness Coating thickness measurements were made using an electromagnetic thickness gauge.
Coating thickness gauge MCW.
Normally, wear is monitored using a thickness gauge.
COMAG thickness gauge.
Ear thickness was measured before and 24 hours after challenge by using a thickness gauge.
Insert a thickness gauge 2 between the end.
The best way to measure thickness is with an optical thickness gauge from Bristol Instruments.
Thickness gauge for high-pressure gas cylinders.
Now, these defects are detected by a thickness gauge of which the measurement is filtered.
Let's talk about the following small series, the application of ultrasonic thickness gauge.
Then, the thickness gauge was mounted on the lens holder plate.
With the door closed, position the top of the unit using the panel thickness gauge.
Why should the ultrasonic thickness gauge measure the coupling agent?
Footpad thickness was measured immediately before and 24 hours after the elicitation with a dial thickness gauge.
Insert a thickness gauge between the string and fret at the 8th fret.
Gauge Calibration, check thickness gauge calibration.
A wheel-shaped thickness gauge made of stainless steel to check thickness of fresh and wet film.
Lens wet centre thickness is measured using a Rehder ET-3 electronic thickness gauge.
When using the thickness gauge to adjust the blade clearance, refer to the table.
No gap allowed 9 Lower blade positioning bolt 0 Hex nut q Thickness gauge w Lock button e Switch trigger r.
You'll also be interested in:
Examples of using Gauge
Show more
And gauge how we might come together
Slide the depth gauge rod backward
Pressure gauge to detect blockage of secondary filter
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
