Examples of 'thickness of the outer' in a sentence
Meaning of "thickness of the outer"
thickness of the outer - Describes the measure or dimension of the exterior part of something. Often used in physical descriptions of objects or materials
How to use "thickness of the outer" in a sentence
Basic
Advanced
thickness of the outer
Thickness of the outer polymer layer.
This phenomenon is caused by the inconsistent thickness of the outer skin layer.
The thickness of the outer shell wall may vary.
The film hinge is preferably determined by a material thickness of the outer shank.
The thickness of the outer edge after winding will now be discussed.
A coating type and a coating film thickness of the outer surface are not particularly limited.
The thickness of the outer layers formed to enhance solderability is often not uniform.
The central layer is ignored for the determination of the thickness of the outer layers.
The thickness of the outer wrapper can also be varied to reduce visible sidestream smoke.
The hydrogen can not penetrate into the thickness of the outer wall unless it decomposes again.
The thickness of the outer sheath 7 is written eg.
The crystal 9 is thus buried in the thickness of the outer caseband.
The thickness of the outer envelope is typically at least 3 mm.
The crystal 9 is thus embedded in the thickness of the outer caseband.
The wall thickness of the outer wall is, for example, approximately equal on all sides.
See also
This makes it possible to reduce the thickness of the outer sheath 7.
The exact thickness of the outer layer 46 for best operation has not yet been determined.
The particular coloring agent selected can directly influence the desired thickness of the outer layer 26.
In particular, the thickness of the outer shell wall may vary along the first axis.
The width of the second profile 15 corresponds to the thickness of the outer spacer element 13.
The thickness of the outer layer may be determined conventionally by scanning electron microscopy ( SEM ).
The offset also accounts for any thickness of the outer shrink-tubing 52.
The wall thickness of the outer pipes is preferably in a range of 1 mm to 10 mm.
The gap 110 is preferably less than the thickness of the outer spool layer 90.
The average thickness of the outer wall is approximately 660 microns.
The thickness of the outer sheath is about 8 % of the cable outer diameter.
In some embodiments the thickness of the outer and inner glass panes 155 are different.
A thickness of the outer circumferential side portion is preferably 0.5 mm to 3 mm.
Likewise the thickness of the outer wall 22 is not critical.
The thickness of the outer wall is about 3.5 feet.
Thus, the thickness of the outer shell wall 4 varies along the first axis X.
The thickness of the outer lining 30 is a minimum of 1mm.
Lastly, a thickness of the outer wall portion 500 is denoted by w.
The thickness of the outer sheath 22 is for example comprised between 5 mm and 15 mm.
You'll also be interested in:
Examples of using Outer
Show more
Remove top or outer panel from oven
Outer door is not responding to computer commands
Pull it out of the outer container or harness
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
