Examples of 'thickness of the plate' in a sentence
Meaning of "thickness of the plate"
thickness of the plate ~ refers to the measurement of how thick a plate or similar object is
How to use "thickness of the plate" in a sentence
Basic
Advanced
thickness of the plate
The thickness of the plate has nothing.
Especially when shortening the thickness of the plate should be considered.
The thickness of the plate you want to weld.
Testing sensitivity must not be affected by the thickness of the plate.
And t is the thickness of the plate.
This thickness of the plate creates difficulties in cutting the trench.
The level of that plane in the thickness of the plate may be different.
The thickness of the plate is preferably approximately equal to that of the opaque sheet.
The time of the explosion is regulated changing the thickness of the plate.
The required thickness of the plate is largely dependent on pressure.
The thickness of the notch corresponds substantially to the thickness of the plate.
The thickness of the plate will depend upon the desired wall thickness for the cylinder.
Undersized passages can lead to blockages within the thickness of the plate.
The thickness of the plate is a maximum of 1 cm.
The average diameter of the blasting perforation is half the thickness of the plate.
See also
The thickness of the plate is for example of the order of 1 mm.
The actual deformation also has a significant relationship with the thickness of the plate.
Consequently, the total thickness of the plate assembly changes thereby hardly or not at all.
There is usually very little difference between this distance and the thickness of the plate.
The initial thickness of the plate of thermosetting material 30 is designated as S.
The member comprises a plate having a plurality of openings extending through the thickness of the plate.
Length, breadth and thickness of the plate.
Nominal thickness of the plate ( e ) or depth of any discontinuity zone in mm.
This bezel or gasket is reusable depending on the thickness of the plate 9.
The thickness of the plate is less than the width of the slot 12.
However, the shear strain is constant across the thickness of the plate.
The thickness of the plate ( skull bone ) is measurable by CAT ( computer aided tomography ) scan.
Fig . 6 is a graph showing the stress distribution over the thickness of the plate during cooling.
The thickness of the plate is advantageously equal to 1.6 mm.
The surface pressure can be controlled by regulating the thickness of the plate B15.
The thickness of the plate 37 may be that of a strake 8.
The clamping, of course, is proportional to the thickness of the plate.
A suitable thickness of the plate can be 1-5 mm.
This quantity of material may likewise be predetermined by the thickness of the plate ( 4 ).
Exceptionally, the thickness of the plate may drop to about 100 microns.
The protuberances 14 are spaced apart a distance corresponding to the thickness of the plate 4.
I / Io = e-ux where x is the thickness of the plate and.
It is the glass sheet ( 1 ) that represents the majority of the thickness of the plate.
Also, the draft is reduced with a decrease in thickness of the plate element 40.
The balls 14 preferably have a diameter at least equal to twice the thickness of the plate 13.
The height of the interface portion is substantially equal to the thickness of the plate 481.
This slit 21 should have a width which is considerably smaller than the thickness of the plate 9.
F2= Weld factor in the case of 2-dimensional dissipation independent of the thickness of the plate.
In other words, each incision 14 extends through the entire thickness of the plate 7.
Preferably, the depth of the recess 28 is substantially equal to the thickness of the plate 27.
The radius may be, for example, one-third to two-third of the thickness of the plate.
The inking dead zone Zm is minimal, i.e., close to double thickness of the plate.
The diameter of the hole A10a is determined based on the thickness of the plate A11.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
