Examples of 'thread sealant' in a sentence
Meaning of "thread sealant"
thread sealant ~ a substance or material used to create leak-proof seals on threaded connections. It is commonly applied to pipe fittings, valves, and other threaded components to prevent fluid or gas leakage
How to use "thread sealant" in a sentence
Basic
Advanced
thread sealant
Use thread sealant on all male threads.
This demonstrated the satisfactory function of the thread sealant of the invention.
Do not use thread sealant on this connection.
The riflescope is not mounted securely or the mount was not fixed with thread sealant.
Use thread sealant to assure there are no leaks.
Apply medium strength thread sealant to threads of screws.
A thread sealant is required for a good connection between pipes and fittings.
Use the appropriate thread sealant on all connections.
Apply thread sealant to the sensor and insert the sensor into the threaded connection.
Threads need to be sealed Apply thread sealant.
Use a decent thread sealant to seal connections.
Wrap the threads with PTFE pipe thread sealant tape.
Do not use thread sealant compound pipe dope.
Install Solenoid Valves Use only teflon tape as a thread sealant.
Use thread sealant to prevent leaks.
See also
Remove manifold, apply thread sealant and tighten.
Apply thread sealant to the threads on the connection fitting.
Remove gauge, apply thread sealant and tighten.
Apply thread sealant tape and install the shower arm to the shower elbow.
Keepflare end of adaptor free of grease, oil and thread sealant.
Apply pipe thread sealant to the gas inlet located.
Keep flare end of adaptor free of grease, oil and thread sealant.
Apply the same thread sealant to the top thermowell threads.
The plugs have O-ring seals and can be installed without thread sealant.
Use a good thread sealant for the sealing of the connections.
If the Verabar does not have a valve head, install instrument valves using proper thread sealant.
Apply the same thread sealant to the elbow threads and thread into union.
Hand-tighten only, with appropriate thread sealant or teflon tape.
Apply thread sealant to the nipple and thread the spout onto the nipple.
In this case, wrap all joints with PTFE pipe thread sealant tape before making connections.
Apply thread sealant tape to the nipple and thread the shower arm onto the nipple.
Use PTFE pipe thread sealant tape on male ends of.
Apply thread sealant or tape to the bottom RTD threads and thread into the thermowell.
Use only PTFE pipe thread sealant tape on joints in plastic pipe.
CEJN 's thread sealant is a dry, non-hardened product that seals against pressure immediately after assembly.
Use pipe joint compound / thread sealant approved for natural and LP gases.
DO NOT use thread sealant tape on pump tube connections or tools to tighten connections.
Use PTFE pipe thread sealant tape on pipe connections.
Use thread sealant tape ( not provided ) for airtight connection . See Figure 2.
DO NOT use thread sealant on any of these connections.
Use pipe thread sealant on all threads, and tighten joints thoroughly to prevent air leaks.
Instead, use thread sealant tape on the shower arm threads.
Apply thread sealant to the 3/8 " MPT thread end of manual control valve.
Use pipe thread sealant that is certified for use with LP gas.
Pipe thread sealant certified for LP gas.
Apply pipe thread sealant ( paste type ) to external pipe threads.
Do not use thread sealant compound ( pipe dope ) on the shower arm threads.
You'll also be interested in:
Examples of using Sealant
Show more
Allow the sealant to cure before proceeding
I am whipping up a batch of dermal osmotic sealant as we speak
Apply sealant tape to threads of exposed fittings
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
