Examples of 'throttle control lever' in a sentence
Meaning of "throttle control lever"
A mechanical device or lever used to control or regulate the flow of fuel or air in an engine
How to use "throttle control lever" in a sentence
Basic
Advanced
throttle control lever
Throttle control lever in the wrong position.
Squeeze the throttle control lever.
Throttle control lever not in correct starting position.
Operate the engine with the throttle control lever in the fast position.
The throttle control lever is located on the engine.
Depress the throttle safety release and throttle control lever to operate tool.
Release throttle control lever to stop tool.
Opens and closes carburetor choke valve Throttle Control Lever.
Move throttle control lever from fast position.
Switch on the transmitter and move the throttle control lever to the full throttle position.
Set the throttle control lever in the third position from the bottom.
If slowing is necessary, move throttle control lever to.
Press the throttle control lever right down.
During engine operation, the throttle control lever.
Use the throttle control lever to select engine speed.
See also
Press the throttle lock-out in and squeeze the throttle control lever.
Move the throttle control lever slightly to the left.
Selects the forward speed 2 Throttle control lever.
Move the throttle control lever fully to the right.
NOTE, The spindle revolves at full speed when throttle control lever is fully depressed.
Put the throttle control lever into idle run.
Tightly grasp the throttle control knob ( B ) and pull it off of the throttle control lever.
Move the throttle control lever forward to the full throttle position.
Pull the starter grip 3 to 5 times, and release the throttle control lever throttle trigger.
Use the throttle control lever to increase or decrease the speed of the engine.
Push the throttle control knob ( B ) onto the throttle control lever.
Move the throttle control lever to the idle position to reduce engine speed.
Always position the throttle control lever in the FAST.
Throttle control lever is not in the " Fast " position.
On models equipped with a throttle control lever ( A ), move the throttle control lever to.
Set the throttle control lever of your remote control to the lowest position motor off.
Move the Throttle / Choke control, or Throttle control lever to the FAST ( rabbit ) position.
Move throttle control lever to STOP or OFF position.
Always keep the throttle control lever in the FAST rabbit.
Move throttle control lever to IDLE or SLOW position, if equipped.
Note that the throttle control lever only functions after the auger is turning.
Move throttle control lever on engine to “ SLOW ” for a few seconds then move to “ STOP ”.
Check that the throttle control lever is in the ' ' position.
Move throttle control lever to STOP position.
Defective throttle control lever or wire 7.
Move throttle control lever to " choke " position.
Move the throttle control lever to the FAST rabbit.
Move the throttle control lever to the FAST position.
Move engine throttle control lever to FAST or ON position.
Set the throttle control lever at half-way position.
Always keep the throttle control lever in the FAST ( rabbit ) position while mowing.
Move the throttle control lever to “ full throttle ” position.
Keep the throttle control lever ( throttle trigger ) fully squeezed.
Position the throttle control lever ( gray ) for the desired engine speed.
Place the throttle control lever in “ STOP ” position.
You'll also be interested in:
Examples of using Throttle
Show more
Turn the throttle grip to reduce engine
The engine has a fixed throttle setting
Move throttle control to desired running position
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
