Examples of 'thumb screw' in a sentence
Meaning of "thumb screw"
thumb screw: A thumb screw is a small screw that can be easily tightened or loosened by hand, without the need for specialized tools. This phrase is often used metaphorically to describe a situation or action that is causing discomfort, inconvenience, or pressure, as if one's thumb were being squeezed tightly
How to use "thumb screw" in a sentence
Basic
Advanced
thumb screw
Tighten the thumb screw slightly to secure it.
Tighten the presser foot thumb screw.
Thumb screw for step depth scale.
Raise door and install thumb screw.
Remove thumb screw to release air filter cover.
Loosen the chip collector thumb screw.
Thumb screw to tighten connector bushing.
Remove the locking thumb screw when used.
Thumb screw for locking upper slide pole.
Loosen the presser foot thumb screw and.
Install thumb screw and tighten until snug.
It would be better if it were a thumb screw.
Tighten the thumb screw to lock it into position.
Secure the wire guide with the thumb screw.
Fit the thumb screw q into the hole.
See also
Optional installation bracket and thumb screw not included.
Tighten thumb screw securely by hand.
Fix the depth stop by turning the thumb screw clockwise.
Thumb screw for locking lower slide pole.
The nut is shaped as a thumb screw for your convenience.
Thumb screw to lock on conduit and eliminate dog legs.
This is the thumb screw.
Remove the thumb screw by turning it counterclockwise with a screwdriver.
Release the spring loaded thumb screw and rotate the.
Loosen thumb screw and turn knurled knob to move.
Measure the distance to cut and tighten the thumb screw.
Loosen the thumb screw and remove the shoe.
Replace the chip collector and securely tighten the thumb screw.
Loosen thumb screw and move the support bearing in.
Adjust proper view angle then secure the joint with thumb screw.
Loosen thumb screw and remove the bearing shaft.
Remove the air cleaner cover by loosening the thumb screw and lifting up.
Release the thumb screw which secures the shoe.
Be careful not to cross thread or over tighten the threaded collar or thumb screw.
Tighten the thumb screw and move the steering column.
Adjust the depth gauge to the desired depth and tighten the thumb screw.
Knurled thumb screw.
Tighten thumb screw to ensure the guide is securely in place prior to use.
Regular thumb screw.
Slide the safe on the mounting plate and tighten the internal thumb screw.
Some machines may have a thumb screw or a dial to regulate pressure.
Slide the shoe to the desired position and tighten the thumb screw securely.
Release the thumb screw which serves to secure the vacuum cover.
Install the depth gauge on the tool with the thumb screw and washer.
Fasten the thumb screw until the casing is safely mounted in place.
Adjust the rip guide for the desired width of cut and tighten the thumb screw.
Then tighten the thumb screw to fix the grip at the desired position.
Insert the lifting pole into the lifting pole tube and fix with the thumb screw.
With the thumb screw on the handwheel to the desired position can be fixed.
Adjustment housing Thumb screw.
You'll also be interested in:
Examples of using Thumb
Show more
Squeeze the thumb control lever further
Thumb and forefinger of the right hand
Cutting off his thumb was a stupid order
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
