Examples of 'tighten the blade' in a sentence
Meaning of "tighten the blade"
tighten the blade - This phrase is often used in the context of adjusting a blade on a tool or equipment to make it more secure or effective
How to use "tighten the blade" in a sentence
Basic
Advanced
tighten the blade
Then securely tighten the blade nut.
Tighten the blade holder clamp screw.
I told them to tighten the blade.
Tighten the blade clamping screw securely.
Be sure to securely tighten the blade bolt before continuing work.
Tighten the blade until it is properly tensioned.
Use the hex key to tighten the blade screw securely.
Tighten the blade clamping screw again.
Press the spindle lock button and tighten the blade securing bolt.
Securely tighten the blade retaining screw.
With the bolts set at that position tighten the blade fixing nuts.
Do not tighten the blade installation bolts without.
Place the blade flange on the spindle and hand tighten the blade bolt.
Tighten the blade installation bolts carefully when.
Place the blade fl ange on the spindle and hand tighten the blade bolt.
See also
Tighten the blade bolt and turn it clockwise.
Hold the fan firmly and tighten the blade bolt with the spanner provided.
Tighten the blade bolt as firmly as possible by hand.
Position blade in the lower blade holder and tighten the blade clamp screw securely.
Always tighten the blade arbor nut securely.
Reinstall the outer arbour collar and firmly tighten the blade bolt by turning clockwise.
Tighten the blade bolt securely.
Reinstall the washer and tighten the blade bolt 9.
Tighten the blade insert with the aid.
To avoid injury, check and tighten the blade bolt periodically.
Tighten the blade seating back.
Switch off the motor, tighten the blade tension knob.
Tighten the blade clamp screw back into place.
If ex cessive blade slippage occurs, tighten the blade stud one mark more.
Tighten the blade clamping screw firmly using the spanner.
If excessive blade slippage occurs, tighten the blade stud one mark more.
Tighten the blade with the blade cap by turning it counterclockwise.
Use a 9/16 inch wrench to securely tighten the blade bolt by turning the wrench clockwise.
Tighten the blade clamping screw firmly using the hex key.
Turn the blade tension knob ( 3 ) clockwise, raising the upper wheel to tighten the blade.
Tighten the blade clamping screw firmly with the blade wrench.
Re-fit the outer flange and, holding down the spindle lock button, tighten the blade bolt.
Securely tighten the blade retainer set screw against the blade.
Adjust the blade ( 1 ) to the desired angle, and tighten the blade bevel lock knob.
Loosen or tighten the blade tension by turning the blade tension knob.
Then securely tighten the blade bolt 15.
Tighten the blade depth and blade angle before making your cut.
Use a torque wrench to tighten the blade bolt to 82 N-m.
Tighten the blade installation bolts carefully when attaching the blades to the tool.
Insert and securely tighten the blade screw counterclockwise with the wrench.
Tighten the blade flange using the supplied spanner so hard that it is well secured.
Position blade and tighten the blade clamp screw securely using the T-handle hex key.
Tighten the blade screw by turning it counterclockwise while depressing engaging the spindle lock.
To remove or tighten the blade locknut, always use the method shown in Figure 13.
Tighten the blade installation bolts carefully when attaching the blades to the machine.
You'll also be interested in:
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
Examples of using Blade
Show more
Propeller blade must have cut it in half
This guy knew how to use a blade
Rotate the blade so it falls into place on
