Examples of 'tighten the bolt' in a sentence
Meaning of "tighten the bolt"
Tighten the bolt: to secure or fasten a bolt firmly by turning it in a clockwise direction
How to use "tighten the bolt" in a sentence
Basic
Advanced
tighten the bolt
Securely tighten the bolt and locknut.
Only use the knob to tighten the bolt.
Tighten the bolt to secure the bracket.
Also be careful not to tighten the bolt forcibly.
Tighten the bolt once angle is set.
Return the magazine and tighten the bolt.
Tighten the bolt of the derailleur clamp.
Fit the washer and tighten the bolt correctly.
Tighten the bolt clockwise firmly to secure the.
Use the hex wrench to tighten the bolt securely.
Then tighten the bolt to secure the base.
Depress the spindle lock and securely tighten the bolt.
Tighten the bolt clockwise while holding in the.
Replace the barrel rotation knob and tighten the bolt.
Then tighten the bolt to secure the blade.
See also
Adjust camera parallel to sled and tighten the bolt on the bottom.
Finger tighten the bolt by turning in a.
Place the blade fl ange on the spindle and hand tighten the bolt.
Tighten the bolt on the side of the housing.
Fit the spring washer and tighten the bolt and washer correctly.
Tighten the bolt to secure the guide bar.
Install a new sealing washer and drain bolt and tighten the bolt securely.
Tighten the bolt firmly using the wrench.
Slide the shoe to the desired position and then tighten the bolt firmly.
Tighten the bolt securely using this combination.
Insert the remote clamp bolt and loosely tighten the bolt to hold the assembly together.
Tighten the bolt until the handle is secure.
OUTER WASHER Reinstall and tighten the bolt with your fin.
Tighten the bolt just enough to hold its position.
After adjusting, securely tighten the bolt.
Be sure to tighten the bolt sufficiently.
When the two are level, tighten the bolt.
Tighten the bolt securely with the hex wrench.
When installing the wheel, be sure to tighten the bolt.
Tighten the bolt so it does not come loose during operation.
After adjusting the hanger position, tighten the bolt with.
Securely tighten the bolt using the hex wrench.
Lastly, rotate it back and forth to reach a comfortable working position and tighten the bolt.
Tighten the bolt once again with correct torque.
Using the spark plug wrench / screwdriver, tighten the bolt firmly in a counterclockwise direction.
Tighten the bolt with the hex wrench firmly.
Push the front cover on the tapped bushes ; tighten the bolt heads just slightly.
If loose tighten the bolt at the top of the stem.
Slide the retainer so that the roller contacts the blade, then tighten the bolt.
Make sure to tighten the bolt and nut tightly.
Reinstall the oil level check bolt and a new sealing washer, and tighten the bolt securely.
If you tighten the bolt without the pin on the slider.
While holding the pad with one hand, securely tighten the bolt using the hex wrench.
Tighten the bolt to fix the cup in the horizontal position.
While holding the lock nut in place, tighten the bolt with the Allen wrench.
You'll also be interested in:
Examples of using Bolt
Show more
Remove the bolt with a socket wrench
Bolt or clamp the saw to its support
Stiffener bracket bolt must be kept tightened
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
