Examples of 'tighten the bolts' in a sentence
Meaning of "tighten the bolts"
tighten the bolts - the action of securing or making something firm by using the appropriate tools to fasten bolts in place
How to use "tighten the bolts" in a sentence
Basic
Advanced
tighten the bolts
Tighten the bolts securely with a wrench.
Do not fully tighten the bolts.
Tighten the bolts and nuts securely.
Do not yet tighten the bolts.
Tighten the bolts to secure the die.
Adjust the cutting depth then tighten the bolts.
Tighten the bolts evenly on both sides.
Replace the pan but do not tighten the bolts completely.
Tighten the bolts to lock the angle.
Squeeze the lever completely and gradually tighten the bolts.
Tighten the bolts at the front completely.
Adjust the levers to a comfortable position and tighten the bolts.
Tighten the bolts to secure the base.
Reinstall the belt cover and tighten the bolts securely.
Tighten the bolts with a torque wrench.
See also
Check that both tables are flush and tighten the bolts manually.
Tighten the bolts in two or three steps.
Pull the plate away from the wall to help tighten the bolts.
Tighten the bolts and nuts when finished.
The operative then uses a tool to fully tighten the bolts from outside the vehicle.
Loosely tighten the bolts for further adjustment.
Put the license plate holder back on the vehicle and fully tighten the bolts.
Tighten the bolts so that there is no further movement.
Return the under driver guide and tighten the bolts after the jammed nails are removed.
Tighten the bolts using the spanner supplied.
Replace the top section and tighten the bolts G.
Tighten the bolts and close the cover.
Nut and bolt positions Tine positions Tighten the bolts from outside in.
Tighten the bolts so that the hitch is level.
Then use a Phillips Head Screwdriver to tighten the bolts.
Tighten the bolts on the mounting bracket evenly.
Again, do not tighten the bolts completely.
Tighten the bolts with the spanner provided.
Use an 8 mm socket wrench to securely tighten the bolts.
Tighten the bolts finger tight.
When the two are level, tighten the bolts.
Tighten the bolts to secure blade.
Use a 7 mm socket wrench to securely tighten the bolts.
Tighten the bolts to secure the muffler to the engine.
Apply the lever fully, and gradually tighten the bolts to.
Tighten the bolts according to the prescribed tightening torque.
Once the proper position has been found, tighten the bolts securely.
Tighten the bolts and nuts fastening the control.
Repeatedly move the table, and tighten the bolts gradually in an alternating fashion.
Tighten the bolts just enough to hold its position.
Adjust the angle of each speaker, and then tighten the bolts securely.
Then securely tighten the bolts to lock the handle in position.
Once you have the monitor in place, secure and tighten the bolts on the monitor.
Tighten the bolts securing the support brace to the frame.
Use the supplied hex key and tighten the bolts firmly, to secure handle in position.
You'll also be interested in:
Examples of using Bolts
Show more
Heads of bolts go on the inside of the cart
Fasten with the previously removed bolts
Push bolts into holes on back of handle
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
