Examples of 'turn the adjusting screw' in a sentence
Meaning of "turn the adjusting screw"
turn the adjusting screw - means to adjust or fine-tune a setting or mechanism by turning a specific screw to reach the desired outcome
How to use "turn the adjusting screw" in a sentence
Basic
Advanced
turn the adjusting screw
N turn the adjusting screw counterclockwise.
To reduce the idle speed, turn the adjusting screw counterclockwise.
N turn the adjusting screw clockwise.
To increase the idle speed, turn the adjusting screw clockwise.
Turn the adjusting screw to increase the tension on the cutter chain.
For a slower flow, turn the adjusting screw clockwise.
Turn the adjusting screw and press down the handle fully to check the result.
If the speed is too low, turn the adjusting screw clockwise.
Turn the adjusting screw clockwise until the pressure gauge shows the outlet pressure wanted.
If the speed is too high, turn the adjusting screw counterclockwise.
Turn the adjusting screw to the right by max . one turn.
When you sew heavy or lightweight fabrics, turn the adjusting screw.
Immediately turn the adjusting screw to the left until chirping noise stops.
To adjust the supply rate, use a small screwdriver to turn the adjusting screw.
Loosen the counternut and turn the adjusting screw until the desired height is obtained.
See also
When the cutting head keeps rotating after releasing the trigger, turn the adjusting screw counter-clockwise.
Then turn the adjusting screw anti-clockwise until the.
Turn reduce oil feed - N turn the adjusting screw.
Turn the adjusting screw to the left, and the engine rotation.
Using a Phillips head screwdriver, turn the adjusting screw 2.
Turn the adjusting screw anti-clockwise until the pressure spring is unstressed.
Adjust the clearance by loosening the lock nut ( B ), then turn the adjusting screw C.
Turn the adjusting screw to the right, and the engine speed will increase.
To do so, turn the adjusting screw 6 until the.
Turn the adjusting screw to the right, and the engine rotation will increase.
STANDARD LOW-SPEED SETTING, - Turn the adjusting screw 2 to the limit in a clockwise direction using a.
Turn the adjusting screw to the left, and the engine rotation will drop.
Turn the adjusting screw clockwise to decrease the flow or counter-clock wise to increase flow.
Turn the adjusting screw in ( clockwise ) to increase the.
Turn the adjusting screw 25 clockwise to tension the chain and anti-clockwise to loosen it.
Turn the adjusting screw ( F ) to raise or lower the front of the armrest d.
Turn the adjusting screw ( A ) with the hex head wrench included in delivery.
Turn the adjusting screw out ( counter-clockwise ) to decrease the downwards travel of the Cutting Head.
Turn the adjusting screw ( E ) in a clockwise direction.
Then turn the adjusting screw ( E ) clockwise until it bottoms.
N turn the adjusting screw to " E " Ematic position.
Turn the adjusting screw ( 6 ) to adjust the floating amount.
You'll also be interested in:
Examples of using Turn
Show more
Persuade him to turn over a new leaf
Now turn around and meet him
The unit does not turn on when installed
Examples of using Adjusting
Show more
Adjusting the balance effects all sources
Proceed as for adjusting the left fence
Adjusting the white balance manually recommended
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
