Examples of 'vent hood' in a sentence
Meaning of "vent hood"
vent hood - A vent hood, also known as a range hood or extractor hood, is a kitchen appliance installed above a cooking stove or range to remove airborne grease, fumes, smoke, and odors produced during cooking. It helps maintain air quality, prevent the accumulation of grease residues, and provide better ventilation in the kitchen
How to use "vent hood" in a sentence
Basic
Advanced
vent hood
Installation will be easier if the vent hood is.
The vent hood is internally equipped with a thermal switch.
Determine the exact location of the vent hood.
The vent hood is equipped with an internal thermal switch.
Use care when cleaning the vent hood filters.
Oxygen vent hood retracted.
Reinstall the metal grease filter to the vent hood.
Clean the vent hood on a regular basis to ensure optimal performance.
It is recommended that an overhead vent hood be used with this cooktop.
This vent hood is for use with a gas grill only.
Turn on kitchen ventilation or if vent hood is a recirculation type open a window.
The vent hood must be secured to rear support framing or a wall stud.
Make sure that the vent hood is level and upright.
This feature is for convenience and prevents damage to the vent hood.
The vent hood is packed with the duct cover and support frames.
See also
Make sure the area around the vent hood is clear.
The vent hood should be on site before final framing and wall finishing.
Remove knockout from the top of the vent hood and install.
The vent hood should be installed over the rangetop or range before installing this backsplash.
Maybe enough that we can finally get that new vent hood.
All wall and floor openings where the vent hood is installed must be sealed.
These ranges must be installed in conjunction with a suitable overhead vent hood.
The vent hood is shipped secured to a shipping board with 4 screws.
It is recommended that these rangetops be installed in conjunction with a suitable overhead vent hood.
Follow vent hood manufacturer 's installation instructions to install vent hood.
It is recommended that these ranges be installed in conjunction with a suitable overhead vent hood.
This vent hood is for outdoor, wall mount installation only.
This is the minimum height that the bottom of your vent hood can be installed.
Oxygen vent hood retracted . External tank is at flight pressure.
To remove filters Euro vent hood only.
IMPORTANT - The vent hood must be secured to rear support framing or a wall stud.
I need you and Robert to help me hold the vent hood.
When you are finished, reconnect the vent hood to the electrical source.
It is strongly recommended that this appliance be installed in conjunction with a THERMADOR vent hood.
WARNING, All wall and floor openings where the vent hood is installed must be sealed.
Installation preparation Advance planning Determine the exact location of the vent hood.
APU to inhibit . Oxygen vent hood retracted.
Installation Instructions Ductwork and wiring locations Determine the exact location of the vent hood.
Oxygen vent hood retracted. to inhibit.
Wall framing for adequate support This vent hood is heavy.
For converting vent hood to recirculation mode ( not vented to the outside ), order Kit no.
ALWAYS run your cooktop ventilation system or vent hood during broiling.
This vent hood must use a 6 ” round duct.
Turn on power See Use and Care Guide that came with your vent hood system.
This vent hood must use 8 ” round rigid duct.
Like the ones in every laboratory ever built . I am gonna make a vent hood.
It is recommended that a 600 CFM or larger vent hood be installed above the cooktop.
A vent hood 104 collected fumes from the test and a vent 105 vented fumes outside of the building.
It 's the vent hood.
As illustrated in Figure 1, the beam winder can also include a vent hood 250.
