Examples of 'viscosity decreases' in a sentence
Meaning of "viscosity decreases"
viscosity decreases - In a scientific context, this phrase signifies that the resistance of a fluid to flow or deform gradually lessens. It describes a decrease in the thickness or stickiness of a liquid, making it flow more easily
How to use "viscosity decreases" in a sentence
Basic
Advanced
viscosity decreases
Viscosity decreases slightly with increasing temperature.
As monomer is generated the viscosity decreases.
The viscosity decreases if the solution concentration is low.
The latter elements become more important as viscosity decreases.
Viscosity decreases with increasing shear.
The rate of penetration of the coating increases as the viscosity decreases.
The emulsion viscosity decreases as a result of adding water.
The breakover curve goes through a breakover maximum and then the viscosity decreases.
The viscosity decreases significantly by heating.
The principal rule is that the viscosity decreases with the kappa value.
Viscosity decreases as the temperature increases and increases as the temperature decreases.
Shear thinning is an effect where viscosity decreases with increasing rate of shear stress.
The viscosity decreases with increasing shear rate as well as with increasing temperature.
These results show that the viscosity decreases with a decrease in particle size.
Past this point redispersion begins to occur and the viscosity decreases again.
See also
Preferably the viscosity decreases upon instillation into the eye.
The starch then liquefies gradually, and its viscosity decreases.
This higher viscosity decreases the tendency to sedimentation of the heavy hard substance particles.
Using higher temperatures, the melt viscosity decreases drastically.
The viscosity decreases when PMDA is used in an excess to said value.
At higher temperatures, the viscosity decreases as depolymerization occurs.
Viscosity decreases in the cold, brittleness increases.
The turbidity increases and the viscosity decreases due to the polymer chain recoil or shrinkage.
As the amount of basic salts in solution decreases, the viscosity decreases.
As shear is increased, viscosity decreases by five orders of magnitude.
If the material has a strain thinning behaviour, its elongational viscosity decreases.
As can be seen, the viscosity decreases with increasing temperature.
As a result, some of the crosslinks dissociate and the viscosity decreases slightly.
In other words, the viscosity decreases when the temperature decreases.
Mechanical adhesion, the interlocking of fibers at adjoining points, increases as the viscosity decreases.
In fact, the elongational viscosity decreases to a ductile rupture of the sample.
Generally, as cellulose chains are broken and the lignin is removed, the viscosity decreases.
If no peroxide is used, the melt viscosity decreases sharply during processing.
When the composition is being injected, shear forces are high, and the viscosity decreases.
As indicated earlier, viscosity decreases as the excess of phosphoric acid increases.
The data indicated that, as reported in the art, viscosity decreases after irradiation.
Pulp viscosity decreases slowly from pH 6 to 7, then falls rapidly at pH values higher than 7.
As the grease temperature rises, viscosity decreases and the grease becomes thinner.
For example during the disintegration of a biomass of the cluster-type, the viscosity decreases.
For the stable solutions, the viscosity decreases as the concentration of the acid increases.
The speed increases, that is, the shear rate increases and the viscosity decreases.
At all pHs and temperatures, the bulk viscosity decreases significantly for all samples.
As the styrene, butadiene ratio decreases, the mooney viscosity decreases.
When the castor oil is dehydrated, the viscosity decreases and the iodine value increases.
As the reheat temperature is increased, the glass sample softens, that is, its viscosity decreases.
And thus, the viscosity decreases.
If a stress above a critical value is supplied, the material flows and viscosity decreases rapidly.
As a result, viscosity decreases.
Further, when terminal mannose is absent, viscosity decreases.
Increasing the turbulence the viscosity decreases and the material can easier flow into pipes 8, 9.
You'll also be interested in:
Examples of using Decreases
Show more
This decreases the risk of being struck by lightning
Or rapidly increases or decreases the time display
Decreases when you launch an attack or dash
Examples of using Viscosity
Show more
High viscosity materials applied without problems
Effects of polysaccharides on viscosity in the rheology of foods
Its viscosity lets an unctuous consistency reappear
