Examples of 'viscosity grade' in a sentence
Meaning of "viscosity grade"
Viscosity grade: A term used in the oil and lubricant industry to classify the viscosity of fluids, such as oils or lubricants, based on their flow properties. Higher viscosity grade numbers indicate a thicker fluid
How to use "viscosity grade" in a sentence
Basic
Advanced
viscosity grade
Viscosity grade system for industrial oils.
Preferably a low viscosity grade of the alginate is used.
Refill with new oil of recommended SAE viscosity grade.
The viscosity grade of engine oil.
The number before the W represents the winter viscosity grade.
Same oil type viscosity grade recommended factory fill.
The value after the W represents the engine oil viscosity grade at high temperatures.
The use of the correct viscosity grade guarantees optimum engine or gearbox protection.
Fractionating the hydrofinished oil fraction obtained in step ( e ) according to a viscosity grade.
It strongly depends on the viscosity grade of the cellulose derivative used.
Viscosity Grade, Choose a viscosity grade as advised by the original equipment manufacturer.
First, you should consider the viscosity grade your manufacturer recommends.
The higher the viscosity, the higher the SAE viscosity grade is.
Water has a low viscosity grade whereas syrup has a higher viscosity grade.
Using such separation, base oil products having various viscosity grade may be finally ensured.
See also
Select the oil 's viscosity grade according to your expected operating temperature.
With hydraulics, there are two primary considerations - the viscosity grade and the hydraulic oil type.
Select the oil 's viscosity grade according to the expected operating temperature also see chart.
The viscosity ranges for some of the ISO viscosity grade numbers are given in Table 1.
The ASTM / ISO viscosity grade system for industrial oils is depicted below.
The method serves to calculate the hot water solution viscosity grade strength, °λ ( wah ).
For asphalt cements, the newer viscosity grade designation is the mid-point of the viscosity range.
The poly ( vinyl alcohol ) is preferably a low viscosity grade PVOH.
Selectthe oil 's SAE viscosity grade according to your expected operating temperature.
Advantage of the estolide is its high viscosity index ( VI ) and viscosity grade of ISO 46.
Select the oil 's SAE viscosity grade according to the expected operating temperature.
The best value was obtained for CMC 7LF, the low viscosity grade gum.
The ISO viscosity grade of the polyvinyl ether oil used in the experiment is VG68.
The viscosity ranges for the ISO viscosity grade numbers are given in Table 1.
Oil type viscosity grade' means a viscosity grade as defined by SAE J306.
In some particular but non-limiting embodiments, an ISO viscosity grade of 320 may be selected.
Therefore, a viscosity grade of 68 or higher is frequently selected in these applications.
For an engine oil, the base stock may range from SAE viscosity grade 0W to 15W.
Which viscosity grade should I choose?
You'll also be interested in:
Examples of using Viscosity
Show more
High viscosity materials applied without problems
Effects of polysaccharides on viscosity in the rheology of foods
Its viscosity lets an unctuous consistency reappear
Examples of using Grade
Show more
Anything involving a third grade class is an automatic no
Food grade gelatine can also be produced
You know they grade this trip
