Examples of 'wire clamp' in a sentence
Meaning of "wire clamp"
A wire clamp is a device commonly used in electrical and telecommunications applications to secure and hold wires or cables in place. It typically consists of a metal or plastic construction with a fastening mechanism that can be tightened to grip and secure the wire, preventing it from slipping or becoming loose. Wire clamps are used to provide stability and prevent wire damage or disconnection
How to use "wire clamp" in a sentence
Basic
Advanced
wire clamp
Install the wire clamp included in parts bag.
Then fix the wires in place in the wire clamp.
Tighten the wire clamp to secure the cable.
Insert the cable in the hood and tighten the wire clamp to secure the cable.
Remove the wire clamp screw and the three.
Place the hood under the cabinet and tighten the wire clamp to secure the cable.
Unscrew the wire clamp screw and the contact screws.
Remove the wire harness from the wire clamp and the connector.
Screw the wire clamp on again and mount the connection cover.
Fiber drop wire clamp.
Install the wire clamp on the back side of the wiring box.
Secure the cable to the box using the wire clamp supplied in the parts bag.
Insert the wire harness back into the connector and secure it with the wire clamp.
Guy wire clamp.
Service PCB b Terminal communication cable c Terminal power supply cable d Earth connection e Wire clamp a c d e b.
See also
Kirschner wire clamp.
Optic Drop Wire Clamp - manufacturer, factory, supplier from China.
Pass power cable through the wire clamp in the wiring box.
Firmly secure the wire clamp so that wire terminations do not receive external stress B.
Strain Relief Adhesive wire clamp with tie.
Jdl Earth Wire Clamp - manufacturer, factory, supplier from China.
Connect your loudspeakers to the wire clamp terminals marked SPEAKERS.
Jbc Earth Wire Clamp - manufacturer, factory, supplier from China.
To connect cables, unscrew the wire clamp first.
Close the sprung wire clamp over the plate and engage it again.
Carburettor throttle cable / wire clamp.
Attach ground wire clamp ( Ground ) to float box.
The unloading port 51 may be connected to the second wire clamp part 48.
Pass the new cable through the wire clamp to the right of the terminals.
The fourth buffer port 43 may be connected to the second wire clamp part 48.
Install the wire clamp and tighten the two 2.5x8mm cap screws securely.
Insert the house wiring cable through the wire clamp previously installed in step 8.
Press the wire clamp in the direction of the arrow » Fig . 42 - and put it into.
The combined neutral / earth CNE is connected to a respective wire clamp of the connection block 325.
