Examples of 'work clamp' in a sentence
Meaning of "work clamp"
work clamp: This phrase refers to a tool or device used to hold and secure objects or materials firmly in place during work, typically in woodworking, metalworking, or construction
How to use "work clamp" in a sentence
Basic
Advanced
work clamp
The work clamp installs in two positions.
Tighten the screw to hold the work clamp.
Connect work clamp to the piece to be cut.
Using the optional work clamp.
Connect the work clamp to the metal to be welded.
Check and correct poor connection of work clamp to workpiece.
Do not connect work clamp to the piece to be removed.
Slide welding cable with ring connector through hole in work clamp.
Attach the work clamp per the following.
Press the workpiece against the fence and clamp with work clamp.
Work clamp to hold workpieces securely.
Properly connect the work clamp to the work piece.
Connect work clamp to workpiece as close to the weld as possible.
Never saw workpieces which can not be clamped with the work clamp.
Use a work clamp to secure the workpiece on the table.
See also
Clean the work piece to ensure good electrical contact of the work clamp.
Place the work clamp in the desired mounting hole.
When sawing ensure that the workpiece is always clamped with the work clamp.
Work clamp not properly in electric contact with piece.
Place the shaft of the work clamp in either hole on the miter table base.
Work clamp must make good electrical contact to the workpiece.
The other end of this cable connects to the work piece with the work clamp.
Insufficient work clamp contact with the work piece.
This machine is sent from the factory with a cutting torch and work clamp installed.
Connect the work clamp to the work piece or workbench if metal.
Use a stainless steel brush to clean the weld area and the work clamp area.
The work clamp is not properly attached to the work piece.
Attach ring connector to work clamp with hex nut removed in step 1.
The work clamp must be securely connected to the work piece.
Once adjustment is complete, install work clamp plate U 2.
Connect work clamp to work piece as close to the cut as possible.
ELECTRICALLY POWERED EQUIPMENT, Regularly inspect the input, electrode, and work clamp cables.
Connect work clamp to work piece as close to the cut or weld as possible.
During the hot press process, the work clamp device 120 grips the work piece.
The work clamp provides greater control by clamping the workpiece to the fence.
Use the optional work clamp or a C-clamp to secure the workpiece.
The work clamp must make good electrical contact to the work piece.
Pull the right work clamp plate ( 4 ) forward to remove it.
The work clamp must be attached to the work-piece while cutting.
Be sure the work clamp makes good electrical contact to the work.
The work clamp will drop, and test feeding will start.
Use the optional work clamp or a C-clamp to secure the workpiece when possible.
Work clamp and / or cable gets hot.
You can use the work clamp ( A ) on the right or left side of the machine.
Insulate work clamp when not connected to workpiece to prevent contact with any metal object.
Connect the work clamp as close as possible to the area you wish to weld.
Position the work clamp and fence to avoid contact with the miter saw head.
To weld, the work clamp must be tightly connected to clean base metal.
Insulate work clamp when not connected to work-piece to prevent contact.
Inspect the work clamp and its lead for damage, repair or replace as necessary.
You'll also be interested in:
Examples of using Clamp
Show more
Do not subject the clamp to running water
You clamp the top of your throat
Then tighten the clamp screw securely
Examples of using Work
Show more
You got to work harder than that
I work for him as sort of a personal assistant
We did this at work with those promo videos
