Examples of 'adjusting nut' in a sentence
Meaning of "adjusting nut"
An adjusting nut is a type of fastener typically used to secure and adjust the position of components within a mechanical system. It is designed with a threaded hole, allowing it to be screwed onto a threaded bolt or shaft. By tightening or loosening the adjusting nut, the position or tension of the connected components can be altered
How to use "adjusting nut" in a sentence
Basic
Advanced
adjusting nut
Adjusting nut has changed position position.
The following applies to standard adjusting nut.
Turn valve gap adjusting nut to specified gap.
Adjusting the torque for standard adjusting nut.
The adjusting nut setting has changed position.
Slowly turn the adjusting nut.
Turn the adjusting nut in direction b.
Ends of the link bars are connected to an adjusting nut.
Turn fluid needle adjusting nut counterclockwise to increase fluid flow.
The amount of clamping force is controlled by the tension adjusting nut.
This will keep the adjusting nut from coming loose.
Check torque adjustment and safe location of the adjusting nut.
The following applies to adjusting nut with radial clamping option.
Refer to label on outside of door for direction to turn adjusting nut.
Adjusting the torque for adjusting nut with radial clamping.
See also
Turn adjusting nut with pin wrench note reference mark.
Screw on sanding sheet with adjusting nut supplied with support plate.
The adjusting nut further defines a bore in communication with the groove.
Assemble the clutch spring with adjusting nut and locking nut.
Turn the adjusting nut until the appliance doors are aligned.
One end of the connecting rod is in threaded connection with an adjusting nut.
Rotate the adjusting nut until it touches the feeler gauge.
First fit the levelling tool on the hexagonal adjusting nut as shown below.
Only use the adjusting nut supplied with the support plate.
Check the torque adjustment and that the adjusting nut sits securely.
Grasp valve gap adjusting nut and screw up valve lock nut.
At least a portion of the shank is threaded for engagement with the adjusting nut.
The adjusting nut must be tightened before starting to work with the machine.
Adjusting the backlash of the bearing using an adjusting nut has numerous disadvantages.
In the middle of the backrest a vertical slot is provided for guiding the adjusting nut.
Do not tighten the adjusting nut since this might damage the bearings.
Check the torque adjustment and ensure that the adjusting nut is sitting securely.
The use of a backlash adjusting nut requires having a threaded surface on the shaft.
A conventional solution for adjusting the backlash of the bearing involves using a backlash adjusting nut.
Open trip cover and turn adjusting nut as shown to set the desired fastener.
To increase clearance, turn the adjusting nut.
Loosen the adjusting nut and lift die head washer foot out of the slot.
Woodruff key Tappet adjusting screw Tappet adjusting nut Tappet adjusting hole cap Valve seal.
Thus, it is possible to use a conventional nut as the adjusting nut.
The hub and the adjusting nut are connected via positive locking with the set screw.
Height is regulated through the adjusting nut 1.
After resetting, the adjusting nut must be fixed on the threaded rod.
To decrease clearance, turn the adjusting nut.
The adjusting nut 8 has a conical free end which terminates in a tip.
To adjust the quantity, turn the adjusting nut.
Rotating the adjusting nut until the bore aligns with one of the recesses ;.
Adjustment takes place by turning the adjusting nut 5.
Open the lever ; turn the tension adjusting nut clockwise a quarter turn ; then try again.
Torque adjustment is carried out by turning the adjusting nut 4.
Then turn the tension adjusting nut counterclockwise one-quarter turn and try tightening the lever again.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Adjusting
Show more
Adjusting the balance effects all sources
Proceed as for adjusting the left fence
Adjusting the white balance manually recommended
