Examples of 'adjusting plate' in a sentence
Meaning of "adjusting plate"
adjusting plate - a metal or plastic plate used for making small changes or modifications in positioning or alignment, typically in machinery or equipment
How to use "adjusting plate" in a sentence
Basic
Advanced
adjusting plate
A moveable adjusting plate is set below the perforated plate.
Turn the lever clockwise to release the adjusting plate.
The moveable adjusting plate is capable of sliding relative to the perforated plate.
Place rear of guide bar between adjusting plate and sprocket support.
Continue to turn adjusting screw until adjusting block is to rear of adjusting plate.
Slip the heel of the adjusting plate into the groove of the drum.
A quantity of intake air can be adjusted by actuating the air intake adjusting plate.
The adjusting plate at the bottom of the door is not in the correct position.
A knob is fixed to the shaft for adjusting plate convexity from the outside.
An adjusting plate and thumb lever at each wheel provides cutting height adjustment.
Preferably, the air quantity adjusting plate is rotated by a driving means.
Further, a first support framework is set below the moveable adjusting plate.
Align shim under adjusting plate as shown in Figure.
Further, locking members matched with the clamping grooves are set on the moveable adjusting plate.
Further, the bottom surface of the moveable adjusting plate is provided with a shifting yoke.
See also
An adjusting plate 2 is attached to the base of the socket 1.
A knee bracket 3 is secured by screws to the adjusting plate 2.
Slip the heel of the adjusting plate into the groove of the drum . Fig . 9.
Locking members matched with the clamping grooves 61a are set on the moveable adjusting plate 68.
FIG . 8 is a perspective view of the adjusting plate of the coupling mechanism ;.
The adjusting plate 60 can be employed in the embodiment of figure 3, too.
Is set below the moveable adjusting plate 68.
The moveable adjusting plate 68 is sliding relative to the perforated plate 65.
Check the position of the index [ 1 ] on the adjusting plate.
The pressure adjusting plate 1 is connected with the valve stem 11.
Align the holes in the adjusting plate ( 7 ) with the screw holes 8.
Adjusting plate 24 sits on four springs 25 spaced evenly around the circumference of pressure plate 27.
An adjusting plate is arranged between the trust control module 34 and the tool body 20.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Adjusting
Show more
Adjusting the balance effects all sources
Proceed as for adjusting the left fence
Adjusting the white balance manually recommended
