Examples of 'annealing temperature' in a sentence
Meaning of "annealing temperature"
Annealing temperature is a term used in materials science and metallurgy to refer to the temperature at which a metal or alloy undergoes a process called annealing. Annealing involves heating a material to a specific temperature and then slowly cooling it to enhance its properties, such as reducing internal stresses, improving ductility, or altering its crystalline structure
How to use "annealing temperature" in a sentence
Basic
Advanced
annealing temperature
Effect of fusion proteins on oligonucleotide annealing temperature.
An annealing temperature described below was also controlled similarly.
It is less important to optimize the annealing temperature.
A lower annealing temperature is generally sufficient.
Only then it is heated up to the annealing temperature.
It also describes annealing temperature and time conditions.
All fluorescent data were collected at the annealing temperature.
The annealing temperature was varied for optimum results.
The first parameter is annealing temperature.
Its annealing temperature is out of target.
Values for rm also were evaluated as a function of annealing temperature.
The annealing temperature influences the product size.
In this case the diffusion annealing temperature is not constant.
Such an annealing temperature has been found to give excellent results.
An important characteristic of the invention resides in the annealing temperature.
See also
Especially the annealing temperature is important.
Ferromagnetism for one coupon was tested at each annealing temperature.
Controlling annealing temperature is another method of reducing or eliminating porosity.
The sheets were water quenched from the annealing temperature.
Determining an annealing temperature is well known to the skilled artisan.
Room temperature hardness is presented in the following figure as a function of annealing temperature.
A second annealing temperature is lower than a first annealing temperature.
In the latter case the diffusion annealing temperature is not constant.
The optimal annealing temperature of a sequence can be determined experimentally or theoretically.
The rate of reduction in intensity is also found to increase with annealing temperature.
Upper annealing temperature.
Much effort is directed toward lowering the annealing temperature and time.
Lower annealing temperature.
The alloy is preferably air cooled from the tempering or annealing temperature.
The annealing temperature is preferably less than the orienting temperature.
These intermediate treatments can be adversely affected if the annealing temperature is too high.
The annealing temperature varies according to the sequence under investigation.
During that time the cold spot also reaches the annealing temperature.
The final intermediate annealing temperature was also for two hours.
The partial pressure of hydrogen leaving the material is measured versus the annealing temperature.
The choice of annealing temperature determines the austenite fraction during annealing.
The nature and the distribution of the defects evolve according to the annealing temperature.
Lower annealing temperature similarly reduces the rate of removal of rolling lubricant.
It is preferred that the same intermediate annealing temperature be used for all intermediate anneals.
The annealing temperature and time were changed for each test piece.
This enables the amplification of more target cDNA due to the slower annealing temperature.
The exact annealing temperature and time is governed by the alloy composition.
Resulting photoluminescence characteristics can be dependent upon an annealing temperature and an annealing time period.
In addition also lowered annealing temperature is an advantage in grain size point of view.
The illegitimate mismatch priming in the first few amplification cycles required a lower annealing temperature.
The annealing temperature is thus adjusted according to the intended use of the cap.
The amount of time for annealing within that range depends upon the annealing temperature.
The suitable annealing temperature is one which will substantially soften the alloy.
Heating the strip to an intercritical annealing temperature IAT.
The annealing temperature was increased and the amount of the sequencing primer was reduced.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Annealing
Show more
Spare parts for annealing furnace pressing
Annealing of flat glass and of container glass
The surface is flattened by annealing at high temperatures
