Examples of 'bending tests' in a sentence
Meaning of "bending tests"
bending tests ~ tests conducted to assess the flexibility or strength of a material or object by subjecting it to bending forces. These tests are used to determine its ability to withstand bending without breaking or deforming, and are often performed in industries such as engineering and manufacturing
How to use "bending tests" in a sentence
Basic
Advanced
bending tests
Bending tests were also performed on the samples.
The cement products were provided directly for bending tests.
Bending tests of rail welds.
Cement products thereof were provided directly for bending tests.
Bending tests were therefore performed.
Three and four points bending tests were performed until failure.
Bending tests results.
Comparison has been done between bending tests verifying the invented formula.
Bending tests for the ribbons were performed in two different directions.
Mechanical tests deal with tension tests and four point bending tests.
Curves from bending tests look similar to those of the crack resistance measurements shown above.
The circular slabs obtained from these two mixes were subjected to bending tests.
Results of tensile and bending tests Material.
Figure 5 shows a sketch of the fixture used for three point bending tests.
Page a Three point bending tests b Tests on compact specimens.
See also
Table I shows the results of the bending tests.
The results of the bending tests were indicated in Table V.
Consequently, the micromodule and its belt do not become detached during bending tests.
The results of the bending tests are indicated in Table V.
The plywood panels ' mechanical characterisations are realised using standardised shear tests and bending tests.
Some experiental three-point bending tests are also performed on long bones.
Figure 17 shows a comparison between a tensile test and bending tests.
Tensile, compression and bending tests can be performed in a machine called universal tests machine.
The samples ( cp ) were tomographed before and after the bending tests at different loads.
Bending tests were performed in 45 ° cantilever, rotating bending, stereomicroscopy and scanning electron microscopy.
Specimens of samples were prepared for bending tests on three points from pre-sintered zirconia blocks.
The optimum resilience of the layer 110 can be determined by means of bending tests.
The results of the bending tests are summarized in Table 2.
The KES-FB2 tester is a instrument used for pure bending tests.
The bending tests were made transversally ( T ) to the rolling direction.
Some samples were subjected to 3-point bending tests to evaluate formability.
The bending tests were conducted on the Instron 5866 load frame.
A three Split Hopkinson Pressure Bar ( SHPB ) setup for three-point bending tests was used.
Fig . 4 shows the results of bending tests of the prior ( left ) and present ( right ) coatings.
Values based on 4-point bending tests.
You'll also be interested in:
Examples of using Bending
Show more
Steam bending is a traditional process steeped in history
Exceptional inverse bending test fatigue strength
Bending over in them tight little clamdiggers
Examples of using Tests
Show more
These tests are now not thought to be necessary
Your cooperation in these tests is greatly appreciated
God tests our faith in many ways
