Examples of 'clamp bolt' in a sentence
Meaning of "clamp bolt"
A clamp bolt is a type of fastener used to secure objects tightly together. It is commonly used in construction, automotive, and manufacturing industries
How to use "clamp bolt" in a sentence
Basic
Advanced
clamp bolt
Install and tighten tube clamp bolt.
Tube clamp bolt and nut.
Always tighten the clamp bolt.
It is simply a clamp bolt and the question is whether it holds.
Tighten the cable clamp bolt.
Remove the clamp bolt and the three retaining screws.
Pull the cable taught and tighten the cable clamp bolt.
Remove the seat post clamp bolt from your bicycle.
The saddle is connected to the frame by the seatpost and seatpost clamp bolt Figure 3.6.
Always make sure that the clamp bolt is securely tightened.
Loosen the clamp bolt by turning it clockwise with the socket wrench supplied.
Position the clamp holder on rod using the clamp bolt of the clamp holder.
Pull the cable clamp bolt outward to disengage it from the carrier.
To install or remove the blower tube, the tube clamp bolt must be removed.
The system includes a clamp bolt to lock the screws to the articulating clamp.
See also
Step 2, Disassembling for cutting Loosen the saddle clamp bolt and remove the saddle.
Tighten the clamp bolt and note the position on the grade rod by the rabbet.
Loosen the cable clamp bolt Figure.
Next, the clamp bolt must be tightened at the back part of the nacelle.
Tighten the seat post clamp bolt to 3Nm max.
Insert the remote clamp bolt and loosely tighten the bolt to hold the assembly together.
Loosen the cable clamp bolt 2.
A manually releasable clamp bolt 712 secures the mounting in clamped position.
FIG . 7 shows the lower clamp body with a clamp bolt keeper in place ;.
A clamp bolt nut 18 is threaded on an end of each clamp bolt 16.
Place clamp head channel on clamp bolt and HAND TIGHTEN to truck bed as shown.
One clamp bolt keeper 24 is preferably provided for each clamp bolt 16.
Then tighten clamp bolt securely 3.
The clamp bolt nut 18 internal threads mate with external threads of the clamp bolt 16.
Re -- insert the tube clamp bolt and tighten.
Finally, the clamp bolt 16 and cross bolt nut 40 are preloaded to their final specified values.
However, the knife is not yet held by the clamp 38 until a clamp bolt 45c is tightened.
Slacken the riving knife clamp bolt ( 75 ) and remove the riving knife.
Slacken the riving knife clamp bolt ( 75 ) just enough to allow the riving.
One embodiment of the clamp bolt keeper nut 32 is shown in Figure 11.
Loosen the front derailleur cable clamp bolt ( Figure 21 ) until the cable is free.
