Examples of 'hex key' in a sentence
Meaning of "hex key"
A hex key, also known as an Allen wrench, is a small handheld tool with a hexagonal-shaped tip. It is used to tighten or loosen screws or bolts with hexagonal socket heads
Show more definitions
- A hex head wrench.
How to use "hex key" in a sentence
Basic
Advanced
hex key
Place a hex key in chuck and tighten.
Remove nozzle by unscrewing with hex key.
Place the hex key in chuck and tighten.
One allen key hex key.
Hex key wrench for removal of drive roll.
Open chuck jaws and remove hex key.
Hex key storage is located in the handle of the.
Install SkiLift with hex key and bolt.
Save the hex key and all instructions.
Remove by pulling on the hex key.
Remove hex key from chuck.
It needs to be removed with a hex key.
Hex key panel kits only.
Use the included hex key to tighten the screws.
Hex key and pull the baseplate to the rear.
See also
Turn screw with hex key tool until tight.
Remove the bottom hinge using the hex key.
Remove hex key and return it to storage compartment.
Retighten the clamping screws with the hex key.
Return hex key into the storage area.
Then fix the knob using the hex key.
Grab the hex key that is in your inventory.
Tighten the chuck around the shorter end of hex key.
Insert the hex key through the mounting bracket.
Open the chuck jaws and remove the hex key.
Insert the hex key into the hole to store it.
Loosen the clamping screw using the hex key provided.
Take the hex key out of the retaining hole.
You can enter your key by typing in the hex key.
You will need a hex key to get the party started.
Hex key included.
Turn setscrew with hex key and adjust base until it is.
Tighten the saw chain with the included hex key.
Use a hex key and give them an extra snugging.
Tighten the blade clamping screw firmly using the hex key.
Use a hex key to gently loosen the screw on the lens.
Locate and remove the hex key from the storage area.
Tap the hex key sharply with a mallet in a clockwise direction.
Insert the short end of the hex key into the setscrews.
Use the hex key wrench to tighten the front screws.
Loosen the chain tensioning bolt with the included hex key.
Remove the hex key and open the jaws fully.
Tighten the chuck around the shorter end of a hex key not supplied.
Use the hex key to tighten the blade screw securely.
Insert the short end of the hex key into the setscrew and.
The hex key used for this is supplied with the accessories.
Insert the short leg of the hex key through the rubber grommet as shown.
Put a hex key through the locking hole located on the spindle housing.
One end of the wrench is a phillips screwdriver and the other end is a hex key.
Using the supplied hex key loosen and remove the arbor.
You'll also be interested in:
Examples of using Hex
Show more
I would not hex myself by saying yet
Hex wrench for loosening control knobs
Slightly undo hex socket head bolt
Examples of using Key
Show more
Activate the keypad using the key
The key developments may be summarized as follows
Stability is another key element in quality of life
