Examples of 'hex nut' in a sentence
Meaning of "hex nut"
hex nut ~ a type of fastener typically made of metal and having six sides or faces, used to secure bolts and screws by threading onto them
How to use "hex nut" in a sentence
Basic
Advanced
hex nut
Loosen hex nut securing adjusting screw.
Be sure to tighten the hex nut securely.
Tighten hex nut to secure belt tension.
Then fully tighten the hex nut.
Remove one hex nut from work.
Assembly and over the hex nut.
Loosen hex nut securing adjustment screw.
Fasten the anchors by turning the hex nut.
Put a hex nut over these and tighten.
Do not overtighten the hex nut.
Tighten the hex nut securely.
Hex nut and washer located behind tire.
Remove the hex nut and outer flange.
Hex nut located behind tire.
Screw the hex nut onto the cap.
See also
A tool may be required to remove the hex nut.
Loosen the hex nut before any adjustment.
Remove the lever from the hex nut.
Engage hex nut with hex drive on drill.
Lock the screw in place by tightening the hex nut.
Tighten the hex nut to secure the chain.
Secure each foot with washer and hex nut.
Place hex nut onto the threaded stud.
Remove center hinge pin using hex nut driver.
Place hex nut onto screw and tighten securely.
Be sure to hold the hex nut carefully with the.
Use the wrench provided to loosen the hex nut.
Unscrew the inner hex nut from the gooseneck.
Reinstall and tighten lock washer and hex nut.
Remove the brass hex nut from the regulator.
Repeat for the second bolt and hex nut.
Tighten hex nut and bevel lock knob securely.
Replace center hinge pin with hex nut driver.
Tighten hex nut and bevel adjustment knob securely.
Remove bottom hinge and shim using hex nut driver.
Replace the hex nut after proper adjustment is achieved.
Remove top hinge and shim using hex nut driver.
Remove the hex nut on the top of ball joint.
Remove bottom hinge and hinge shims using hex nut.
Tighten the hex nut against the main shaft.
Adjust the forward clutch cable by loosening the hex nut.
Unthread the hex nut halfway up the adjustment screw.
Keeps hands away from the sockets of hex nut drivers.
Screw the inner hex nut back onto the gooseneck.
Hex nut drivers with open flathead can crush fingers.
Then replace the other hex nut and tighten it securely.
The hex nut alone must not be used to secure the.
Attach washer and screw on hex nut to the end of each anchor.
Remove hex nut and washer from bottom of belt guard.
Little effort is needed to adjust the footrest by means of an eccentric hex nut.
You'll also be interested in:
Examples of using Hex
Show more
I would not hex myself by saying yet
Hex wrench for loosening control knobs
Slightly undo hex socket head bolt
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
