Examples of 'hex head screws' in a sentence
Meaning of "hex head screws"
Hex head screws: These are screws that have a hexagonal-shaped head, requiring a compatible wrench or socket for installation. They are commonly used in construction and assembly work where high torque is required
Show more definitions
- plural of hex head screw
How to use "hex head screws" in a sentence
Basic
Advanced
hex head screws
Remove two hex head screws.
Hex head screws.
Fasten tightly with slotted hex head screws.
Unscrew the hex head screws from the top hinges.
Do not loosen or remove adjacent hex head screws.
Insert the three hex head screws from the bottom.
Replacing the motor - Remove the hex head screws.
Unscrew the hex head screws from the rollers and remove.
Slide the guard into slot provided and tighten hex head screws with hex wrench included.
Remove the hex head screws from handle side and move.
Using the wheel wrench, turn the two fence mounting hex head screws counterclockwise to loosen.
Transfer two hex head screws from top corner of cabinet to holes left.
Replacing the brushes, pick-up shoes and wheelsets - Remove the hex head screws.
Install one of the hex head screws into the hole.
Secure the wing halves into position using the included 3 x 16mm hex head screws B.
See also
Then tighten the two inner hex head screws to set the angle.
Remove the hex head screws joining the connecting rods to the drive wheels.
Attach the two handle pieces using four hex head screws as shown in figures F and G.
Remove 1 ⁄ 4 " hex head screws from door face with hex head driver.
Locate and remove two H5 hex head screws.
Loosen the two hex head screws and remove the lower front panel.
Attach left side handle ( C ) with four hex head screws H, supplied.
Locate the four hex head screws located on the corners of the back panel.
Mount blower motor to wood spacers using 4 - 8 x ¾ " hex head screws provided.
Remove the two hex head screws that attach the side rods to the rear wheels.
Remove the bottom hinge bracket by removing the four 3/8 ″ hex head screws.
Remove the two outermost hex head screws from the bottom left side of the cabinet.
Install bottom hinge with 3Ú8 " hex head screws.
DO NOT remove hex head screws from rail assembly.
Remove the cover plate on the interface 2 x M2.5 hex head screws.
DO NOT remove the hex head screws from the rail assemblies.
Using the wheel wrench, turn the two hex head screws counterclockwise and remove them.
Remove the 10 hex head screws from the door and remove the door.
To remove light cover, remove the 1/4 ″ hex head screws at the back of the cover.
Remove the 2 hex head screws from the top of the igniter.
Using the slotted hex head screws ( provided ), attach the top grille filler to the soffit.
Loosen the three hex head screws with the wrench provided Fig . 9.
Loosen the three hex head screws ( J ) with the 5 mm hex wrench provided.
Remove the three 5/16 ″ hex head screws that hold the top hinge to the cabinet.
You'll also be interested in:
Examples of using Hex
Show more
I would not hex myself by saying yet
Hex wrench for loosening control knobs
Slightly undo hex socket head bolt
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
