Examples of 'hex screws' in a sentence
Meaning of "hex screws"
Hex screws are a type of fastener commonly used in construction and various DIY projects. They have a hexagonal (six-sided) indentation on the head, which requires a corresponding hex wrench or Allen key to tighten or loosen. Hex screws are known for their high torque resistance and are often used in applications where a secure and durable connection is required
How to use "hex screws" in a sentence
Basic
Advanced
hex screws
Use only the hex screws supplied.
The adjustable stop rails are secured by hex screws.
Then tighten the hex screws definitively.
Remove the blade by removing the internal hex screws.
Seat with hex screws to fasten seat plate a.
Remove the two factory installed hex screws located on.
Using two hex screws and two flange lock.
Lift up on the cylinder when installing the hex screws.
Remove the four hex screws from the bumper.
Remove the belt cover by removing the five hex screws.
Remove the four hex screws on the top of the carriage.
Remove the belt guards by removing the hex screws that.
Reinstall the two hex screws and tighten them securely.
Reattach grille mounting bracket to top trim with two hex screws.
Open the two hex screws and remove the cleaning lid.
See also
The bin had been silicon sealed and tightened with hex screws.
Secure the cover with the two hex screws previously removed.
Remove two hex screws that attach grille mounting bracket to top trim.
Secure the drag chain on the stove module with two hex screws.
Remove the two hex screws securing the printhead to the slide plate.
Lock the pivoting shoe in place by tightening the pivoting shoe hex screws.
Remove four hex screws that attach top trim to side trim two on each side.
Slide the top cover back on and replace the eight hex screws.
Remove the belt guards by removing the hex screws that fasten them to the deck.
Close the top cover and tighten to the base with the hex screws.
Remove the hex screws and flat washers from the hardware pack in your manual bag.
Reattach top trim to side trim with four hex screws two on each side.
Standard hex screws for angled Allen wrench.
Fasten the camera station to the bracket using the included cap head hex screws.
Remove the 4 hex screws used to attach the convection fins.
Disconnect the dislodger from the beam weld bracket by removing the six hex screws.
Remove the two hex screws from the top, right side of.
Securely tighten the socket head Hex screws.
Unscrew the 2 hex screws holding the back of the light in place and.
Install the grill and screw in the 2 hex screws.
Remove the 8 hex screws and grower washers off the loudspeaker to be replaced.
The side metal casing is secured with 2 hex screws.
Remove the grill by removing the 2 hex screws located behind the logos.
If desired, use the security screws in place of hex screws.
Locate the three 2mm hex screws located on the back stand of the monitor.
Mount the mechanism on the tunnel of the damper with 3 hex screws.
Remove the 2 hex screws with a 4 mm hex wrench.
Replace the back of the light and screw the 2 hex screws back in.
Loosen all three hex screws that will be exposed in this way fig . 37.
Install the loudspeaker and screw in the 8 hex screws and grower washers.
Install 2 hex screws ( provided ) through the brace and into the range.
Select desired position for the seat, and secure with the two hex screws removed earlier.
Install the two ( 2 ) hex screws and locknuts that secure the amputee bracket to the wheelchair.
Re-tighten the adjustment hex screws.
Remove the hex screws ( a ) and flat washers ( b ) from the hardware pack in your manual bag.
You'll also be interested in:
Examples of using Hex
Show more
I would not hex myself by saying yet
Hex wrench for loosening control knobs
Slightly undo hex socket head bolt
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
