Examples of 'lag screw' in a sentence
Meaning of "lag screw"
lag screw - a type of screw designed to secure heavy loads
How to use "lag screw" in a sentence
Basic
Advanced
lag screw
Aim for the lag screw.
A lag screw may extend through a radial bore in the nail.
The pins serve to positively lock the lag screw.
Assemble a washer on a lag screw and screw into each hole until tight.
The device is especially suitable for use as a small lag screw and reduction device.
The lag screw or other fixation device is then secured to the femoral head.
The compression screw connects the lag screw to the plate.
Use three-inch lag screw to secure ledger board to wall studs.
The compressing screw connects the lag screw to the plate.
Tighten the top lag screw first, then tighten the remaining lag screws.
If installing on a second wall stud, insert a lag screw into.
Another step includes inserting the lag screw member into the second medullary canal.
The lag screw has a threaded end, or another mechanism for engaging bone, and a smooth portion.
Place the fixture on these two lag screws and install the top lag screw.
Both bone faster embodiments are formed as a lag screw 14.
See also
In the embodiment of the lag screw and compression screw shown in Figs.
Further, an additional compression screw draws the lag screw towards the nail.
In such an embodiment, the lag screw 202 would be replaced with a prosthetic head and neck.
To independently restrict the rotation or sliding of the lag screw 202.
Another step includes slideably coupling the lag screw member to the tapered screw member.
The lag screw 702 extends across the break and into the femoral head.
Intramedullary nails and / or a plate with a lag screw too have deficiencies.
Remove lag screw ( I ) from engine deck support.
Lag bolt - Also known as lag screw.
The threaded end of the lag screw 702 engages the femoral head.
It's rotating on a gate hinge. Aim for the lag screw.
The lag screw 14 is adapted to penetrate the transverse bore 24 of the intramedullary nail 12.
Transverse bore 18 extends through intramedullary nail 20 and is sized to receive lag screw 22 therethrough.
Lag screw 60 also includes an internally threaded bore 68 for receiving threaded compression screw 90.
Further, the pin 56 defines a longitudinal axis intersecting the longitudinal axis of the lag screw 16.
Use three-inch lag screw to secure ledger board to wall studs " aboot " every 12 inches.
Cu / Zn ( brass ) alloy cable clamp with lag screw.
This allows lag screw 22 to pass through transverse bore 18 and reduce the fracture at line 17.
Cu / Zn ( brass ) alloy tape clamp with lag screw.
Further, the lag screw 16 includes a central cannulation 36 along the longitudinal axis of the lag screw 16.
Insert the first gold cortical screw Ø 2.0 mm ; the screw functions as a lag screw.
This particular combination of lag screw 202 and compression screw 204 are further illustrated in Figs.
Alternatively, the width w of the at least one groove 54 of the lag screw 14 of Fig.
