Examples of 'leveling screws' in a sentence
Meaning of "leveling screws"
Leveling screws: Refers to screws or devices used to adjust and ensure the levelness or alignment of an object or surface, such as furniture or machinery
How to use "leveling screws" in a sentence
Basic
Advanced
leveling screws
Place leveling screws through the structure.
The two outer screws are leveling screws.
Leveling screws are provided at the base.
Use adjustable wrench to adjust leveling screws.
Leveling screws should touch the outside wall.
Make sure the leveling screws are free to turn.
Use a socket driver to adjust the leveling screws.
Turn both leveling screws the same amount.
The level is adjusted using the three leveling screws.
Lock the leveling screws in place.
Move griddle plate to the side and turn leveling screws.
Use the four leveling screws to level the vacuum.
Level the base plate by way of the three leveling screws.
Turn the leveling screws up to the base to avoid damage.
Once the height has been set raise the center leveling screws.
See also
The leveling screws are removed.
Level the indoor unit with the leveling screws accessory part.
The two leveling screws are part of the front roller assemblies.
Center the bubble of the circular level using the leveling screws.
Turn the leveling legs or leveling screws to the right to raise.
Leveling screws can be turned easily by tipping the cabinet slightly.
You need to adjust the leveling screws due the floor is unleveled or weak.
Carefully tighten the locking nuts while holding the leveling screws stationary.
Use the leveling screws and level vials to level the instrument.
Make sure that you turn both leveling screws the same amount.
Place the telescope in a position that is parallel to two of the three leveling screws.
Adjust the two leveling screws so that the tubular bubble is centered.
Tighten the locking nuts while holding the leveling screws so they do not rotate.
Use the bottom leveling screws to level the refrigerator from side to side.
Open the refrigerator door and remove the base grille to find the two leveling screws.
Locate the leveling screws behind the base grille of the refrigerator on either side.
Your refrigerator has two adjustable, front leveling screws.
Adjust the leveling screws to level the CANOPY SECTION.
Use a hex-head socket wrench to adjust the leveling screws.
Alternatively, the rear leveling screws can be tightened.
Attach the range hood assembly to the lower vertical supports with 2 leveling screws.
Remove the 2 leveling screws from the structure.
If not, increase the tilt by turning both leveling screws clockwise.
Raise the leveling screws if engaged see page 2.
With the twist removed, it is time to lower the middle leveling screws into position.
If needed, adjust the leveling screws to compensate for an unleveled floor.
To keep the refrigerator level, you should turn both leveling screws the same amount.
If necessary, set the leveling screws to compensate for unevenness of the floor.
Center the bubble within the vial by turning the leveling screws as shown in Fig . 2.
Attach leveling screws and stabilizer bracing, as required by Customer.
Use a hex-head wrench to adjust the rear roller leveling screws until the refrigerator is level.
Leveling Screws - allows adjustments to be made to ensure the instrument is level.
If required, adjust the leveling screws to compensate for the uneven floor.
Level the stand with the four ( 4 ) leveling screws.
Next, adjust the middle leveling screws until lowered onto the leveling pucks.
You'll also be interested in:
Examples of using Leveling
Show more
Adjust leveling legs until refrigerator is level
Tighten nuts to lock leveling foot in place
Adjust leveling legs to the approximate height
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
