Examples of 'lever position' in a sentence
Meaning of "lever position"
Lever position refers to the specific setting or arrangement of a lever, typically in a mechanical device. The lever can be moved to different positions to control various functions or actions of the device
How to use "lever position" in a sentence
Basic
Advanced
lever position
To adjust the depth adjustment lever position.
Adjusting the lever position for angled cuts.
Start can take place irrespective of the gear lever position.
Gearshift lever position information.
Check depth regulator lever position.
Gear lever position.
Adjusting the control lever position.
The selector lever position or the current shift range is shown in the display.
Adjust the tension release lever position correctly.
Automatic pulsing of thruster or use of proportional control of motor based on lever position.
Take a moment to check the lever position to see if this is the problem.
Travel at a constant speed and operate the spreader lever position.
Control lever position for adjusting gas flow and also tip temperature.
It is particularly advantageous for this to be the lever position which is detected.
The lever position only indicates travel direction but not the actual speed.
See also
Observe the possible setting range for the control lever position.
It is sufficient to engage selector lever position P when parking on a flat surface.
The vehicle does not start off after engaging the selector lever position.
The selector lever position N does not have to be selected when stopping for a.
This ensures that the motors provide equal thrust at the same accelerator lever position.
Two examples of the commanded speed versus lever position curve are shown in Fig.
Lever position Grinding fi neness left Fine.
We recommend to let the first load burn down without changing the air lever position.
Lever position of shut off / tank select valve.
The motor starts but will not run at full Incorrect choke lever position.
A user can see from this first lever position I that the cover 34 is properly closed.
Throttle lever is not in the START Correctly position the lever position.
The locking lever position must be set to 90 left.
The engine is operated by the throttle lever position 3.
This saves the current lever position ( incl. trimming ) as new neutral position.
Before operating the device, check the dough piece tipping lever position.
The selector lever position you have engaged is shown in the instrument cluster display » Fig . 95.
Propulsive thrust/power on each engine and cockpit thrust/power lever position if applicable.
The selector lever position R is selected e.g. when parking.
The system of claim 1 wherein said sensor constantly provides a signal indicative of shift lever position.
The shift position sensor 95 detects a shift lever position of the transmission 2.
The method of claim 5 wherein said sensor constantly provides a signal indicative of shift lever position.
S = Sports program Selector lever position " S " provides drivers with a power-oriented shift program.
When parking on a level road surface, it suffices to engage selector lever position P.
The selector lever position you have engaged appears in the instrument cluster display 1 » Fig . 80.
Engine starts, but does not run at full Wrong choke lever position.
Lever position vertical - PRIME ( k circulation ) Lever position horizontal - SPRAY p.
If the N symbol flashes next to the selector lever, engage the selector lever position N.
Lever position not Drive ( currently in Neutral, Park or Reverse ), or.
Follow the instructions for adjusting the lever position on page 14.
The butterfly valve for gas adjustment is factory set at lever position " 1.
While in Tiptronic mode, select the selector lever position 3 or 2 if you are.
At temperatures below -10 C, the engine can only be started in selector lever position P.
The governor mode is only active if the throttle lever position exceeds 60.
Sport program also possible in selector lever position ” D ”.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
Examples of using Position
Show more
Then position the unit as shown below
Verify the correct position of the gasket
Try to position cages out of direct sunlight
