Examples of 'lever should' in a sentence
Meaning of "lever should"
Lever should: Likely an incomplete phrase, which could be interpreted as a suggestion or directive regarding the proper use of a lever
How to use "lever should" in a sentence
Basic
Advanced
lever should
The right lever should be pulled down.
The transfer switch operating lever should be down.
Release lever should move freely.
White valve position lever should move.
Retracting lever should be used only for bevel.
In order to open the passage of primary air the lever should be completely pulled.
The release lever should be down at this time.
Ladies and gentlemen, Aquacage claims that their interior emergency lever should release my associate.
The left lever should be pulled up.
Lever should be checked for smooth and easy action.
An emergency release lever should be on the inside of the door.
Lever should face the side of vehicle that bike is loaded from.
For normal working the lever should be in the down position.
The lever should leave an imprint on your hand.
The presser foot pressure adjusting lever should be set at “ 3 ” for regular sewing.
See also
The lever should move with very little resistance.
For most sewing, the lever should be in this position.
This lever should be used if a film jam or film breakage occurs.
The Recycling / bagging lever should be in the bagging mode.
The lever should also be facing towards the rear of the bike.
A » function engaged « B » function disengaged - Lever should be operated with the blades disengaged.
The lever should now be parallel to the fork blade and curved toward the wheel.
The fuel valve lever should be turned OFF.
The lever should be horizontal with the handle to the front see Figure 1.
Clutch control lever should line up with console corner.
The pump lever should be on the left for right-handed persons.
Brazil, the monetary lever should continue to support activity.
The output lever should actuate the micro-switch at one end-point to switch the searchlights on.
To engage the clutch, the lever should be pressed towards the grip or handlebar.
Choke lever should already be in the “ WARM START ” position.
The brake lever should snap into both positions.
The economic lever should then be used with determination.
The throttle lever should be checked for smooth and easy action.
The selector lever should only be turned when the motor is stopped.
The lock-off lever should have a smooth and easy action.
The stow / deploy lever should latch automatically into the stowed position.
The safety lever should only be used with the anti-theft cables sold on the market.
The parking brake lever should be locked within the specified number of clicks ( B ).
The yoke clamp lever should be at approx . 90 or less to the main handle fig . A2.
AUTOFEED lever should be in neutral ( Vertical ) position see Figure 13.
You'll also be interested in:
Examples of using Lever
Show more
Do not lift lever during brewing cycles
Lever can be adjusted to a different lever angle by
Open the lock lever to unlock footplate
