Examples of 'phillips head screws' in a sentence
Meaning of "phillips head screws"
Phillips head screws are a type of screw that has a cross-shaped indentation on the head, which is used to turn the screw with a Phillips screwdriver. They are widely used in various applications, including carpentry, furniture assembly, and electronics.
How to use "phillips head screws" in a sentence
Basic
Advanced
phillips head screws
It is held in place with two phillips head screws.
Remove the phillips head screws from both sides of the trimmer housing.
You should find two Phillips head screws.
Phillips head screws to secure the transition to the hood outlet on the top.
Secure the locking plate using Phillips head screws.
Remove the phillips head screws from both sides of the trimmer housing or from the.
Remove the grille by removing the two Phillips head screws.
Remove the Phillips head screws located at the back.
Replace the grille by installing the two Phillips head screws.
Loosen the Phillips head screws and open the back panel.
Installs in a few minutes with the included Phillips head screws.
Remove the Phillips head screws located at the back end of each burner.
Attach the handle using the four Phillips head screws provided.
Remove the six Phillips head screws that secure the rear transmitter case half.
Replace the base grille by inserting the two Phillips head screws.
See also
Locate and remove the two Phillips head screws on the top of the refrigerator.
Then remove the center hinge by removing the three Phillips head screws.
Remove the three Phillips head screws securing the drive to the motor assembly as shown.
Secure and tighten the drive assembly with the three Phillips head screws.
One package Phillips head screws.
Secure the back of the burners to the firebox with the Phillips head screws.
Remove the three Phillips head screws securing the PC board.
Fasten wheel assembly to the tank with two steel clips and two Phillips head screws.
Phillips head screws to secure hood to the wood support 2 secured to wood support.
Open the drawer and remove the hinge bracket by removing the three Phillips head screws.
Carefully insert attached phillips head screws into keyholes on side of grill body 2.
However, the included spares are Phillips head screws.
Unscrew 3 Phillips head screws from circuit board.
Reposition bottom plate and 4 Phillips head screws.
Remove 3 Phillips head screws to release the battery pack.
It is held in place by 4 Phillips head screws.
Remove 4 Phillips head screws and lift off duct cover.
Remove the base grille by removing the 2 Phillips head screws.
Remove 3 Phillips head screws from the clean tank side.
Reposition bottom plate and secure with 4 Phillips head screws.
Remove 3 Phillips head screws from the dirty tank side.
Secure the attaching tabs to the cabinet using 8 Phillips head screws.
Phillips head screws from under the climate controls . Coupe only.
Install the custom trim with the original 5 Phillips head screws.
Insert phillips head screws ( A ) through holes in outer lip of smoker box as shown.
Remove the support bar by removing the 2 phillips head screws as shown in Figure 3.
Insert the two Phillips head screws ( included in the accessories bag ) into the holes.
Replacing bottom plate Reposition bottom plate and 4 Phillips head screws.
Remove the seven Phillips head screws securing the motor housing cover, then remove cover.
Place the camera on the bracket with the ( 4 ) phillips head screws.
Remove 5 Phillips head screws from the Fresh Food and Freezer door handles ; retain all screws.
To adjust the tension, loosen, but do not remove, the four Phillips head screws shown.
Insert 2 phillips head screws ( A ) halfway into smoker box connection holes as shown.
Remove the camera plate and mount to the bracket using the ( 3 ) metric 3M Phillips head screws.
Loosen and remove the 2 Phillips head screws that secure the Rack & Pinion Adjustment Knob 23.
You'll also be interested in:
Examples of using Phillips
Show more
Phillips would have had me stuck in a lab
Screwdrivers phillips head and flat head
Phillips screw driver is required for installation
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Head
Show more
It turned my head around about electric cars
The way you hold your head
Only your head will come back
