Examples of 'screw diameter' in a sentence
Meaning of "screw diameter"
screw diameter: Refers to the measurement of the width or thickness of a screw, often used in engineering, construction, or manufacturing to ensure proper fit and compatibility with other components
How to use "screw diameter" in a sentence
Basic
Advanced
screw diameter
Guideline for machine screw diameter.
Clamp screw diameter mm.
Employ a driver bit appropriate for the screw diameter.
Type Screw diameter.
Be sure to adjust the cap position accordqFgLo the screw diameter.
Note, Please confirm the size of screw diameter whether it fits your vehicle before buying.
Be sure to adjust the cap position according to the screw diameter.
Max . screw diameter in mm.
Tightening torque should correspond in its intensity to the screw diameter.
You will have all the 3 mm screw diameter and concrete anchors / brick / suitable hard surface.
Be sure to adjust the clutch dial position according to the screw diameter.
Preferably, the boss is between 2-3 times the screw diameter for self-tapping screw applications.
The capacity of an extruder scales as approximately the square of the screw diameter.
Use a hole diameter 1.5 times larger than the screw diameter to allow for sheet expansion.
The sound power level is given for the noise-related machine parameters maximum screw diameter.
See also
WA respect to the maximum screw diameter.
Hardwood pilot holes should have a diameter of approximately 90 % the size of the screw diameter.
Now the melt moves to the metering section, where the screw diameter remains constant.
Steel Aluminum Machine screw 1 - 22 Use the bit or socket matching the screw diameter.
For mechanical and safety reasons, a minimum screw diameter is set.
Use the bit and socket which are suitable for the screw diameter.
Machine screw Use the bit or socket matching the screw diameter.
In general, torque intensity should correspond to the screw diameter.
The polymer is melted using a single-screw extruder with an 18 mm screw diameter.
The dry blended product was melt mixed using a single-screw extruder having a screw diameter of 65 mm.
Their elongation had to at least be 0.3-times the screw diameter.
The extruder used was a Werner and Pfleiderer ZSK 25 with a screw diameter of 25 mm.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
