Examples of 'screw nut' in a sentence
Meaning of "screw nut"
A screw nut, also known as a nut or threaded nut, is a fastener used to secure a bolt or screw in place. It is a small metal or plastic object with a threaded inner hole that matches the external threading of the bolt or screw. By turning the screw nut clockwise, it can be tightened onto the bolt or screw to hold two or more objects together securely
How to use "screw nut" in a sentence
Basic
Advanced
screw nut
Screw nut for valve seal.
Height and working angle can be adjusted by a simple screw nut.
Tighten the screw nut carefully because of the aluminum thread.
In this case the element according to the invention is a screw nut.
The screw nut driver assembly has a screw nut driver.
Maximum path which the ball screw nut may axially travel.
The screw nut remains rotation-locked and transforms the rotation movement into a linear movement.
Slide brass nut over sleeve and screw nut into inlet port.
Finally screw nut D5 on to the meat mincer and tighten with reasonable force.
Rotation of the torsion bar causes the jack screw nut to extend or retract.
Please insure the screw nut and switch are in the above condition ;.
Before adjusting release the fixation screw nut G.
Linear displacement of the lead screw nut translates the spring tape along its curved path.
Advantageously, the removable fixing means comprise a screw nut assembly.
The lead screw nut 7 is rotationally locked to the body 1.
See also
The two flanges 7 are connected to each other by a bolt 3 and a screw nut 8.
Finally, the screw nut is fastened against the sleeve 4.
Accordingly quality degradation of the screw shaft 12 and the ball screw nut 11 is prevented.
Screw nut locking, it is gently when inserted and extract, stably locked.
Bearing portion support shafts 68 are installed respectively on both sides of feed screw nut support 60.
The screw nut driver assembly is adapted to automatically tighten a screw nut 301 to be tightened.
Axial displacement when rotating the ball screw by 360 relative to the ball screw nut.
As a result, the ball screw nut 3 does not rotate relative to the inner tube1 either.
Arm 58 and guide 59 maintain radial orientation of the drive screw nut during door movement.
Take off the screw nut and washer on Seat Pad ( N ) and set aside.
The bolt 3 is fixed by a screw nut 8.
This enables a screw nut 156 to be inserted in the widened portion.
Screw 50 is held at the desired position by means of an adjusting screw nut 52.
The lead screw nut 306 is circular, and a slide fit in the casing.
Furthermore, it is possible to measure a torque during tightening the screw nut 301.
Fig . 5 is a schematic side view of a screw nut driver assembly 400 according to a typical embodiment.
FIG . 2 shows an axial opening of the lead screw nut 7.
Screw Nut - manufacturer, factory, supplier from China.
Use spanner to take off the screw nut for wheel . Fig.7.
Figure 14A is a top view similar to figure 11 with the screw nut in the drive position ;.
You'll also be interested in:
Examples of using Nut
Show more
I am kind of a hard nut to crack in that department
A nut who knows a lot about bombs
Loosen the bottom nut to eliminate water
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
