Examples of 'sheave' in a sentence
Meaning of "sheave"
sheave (verb) - to pass a rope or wire through a block or pulley
Show more definitions
- A wheel having a groove in the rim for a rope to work in, and set in a block, mast, or similar; the wheel of a pulley.
- A sliding scutcheon for covering a keyhole.
- To gather and bind into a sheaf.
How to use "sheave" in a sentence
Basic
Advanced
sheave
Hoist guide sheave lateral transfer device.
Check compressor pulley and engine sheave are.
The sheave did not suffer any damage.
Put belts onto center sheave last.
The or each sheave may be dish shaped.
It is also necessary to avoid corrosion of an elevator sheave.
The traction sheave is driven by a traction motor.
Geared machine with friction sheave.
Governor sheave with an overlapping flyweight system.
Torque is proportional to the diameter of the traction sheave.
The sheave may be fitted to a controllable spring.
A support surface for the sheave.
All of the sheave axes are substantially parallel.
Exploitation of the car brake in the traction sheave elevator.
The or each sheave may be powered by a motor.
See also
One part traction sheave.
Check sheave setscrews to ensure tightness.
Grooves for the teeth are made in the traction sheave.
Carefully align sheaves to avoid premature sheave failure.
The car is suspended below the payout sheave module.
The other sheave in this example is an idler sheave.
The cam plate is opposed to the movable sheave body.
The primary sheave is provided on the crank shaft.
Method for changing the rope of a traction sheave elevator.
Sheave for use in an elevator system.
This is a traction sheave elevator with machinery below.
Sheave shaft bearing.
Over hung sheave machine.
This sheave was attached to the input shaft of the transmission.
The elevator is a traction sheave elevator with machinery below.
Sheave shaft load.
Traction sheave centre.
The sheave is maintained in position by the fixing rope of the sheave.
Traction sheave spider.
The sheave arrangement may be disposed in the upper section of a building.
Treble sheave block.
Flying traction sheave.
The sheave has a centered axle.
Double wrap sheave.
The or each sheave may comprise a plurality of grooves.
A flexible collar for attaching said first element to said sheave.
To reduce the sheave diameter two approaches are possible.
The machine brake is generally arranged to engage the traction sheave.
Double sheave snatch block.
The radial grooves are arranged in pairs between each sheave section.
Traction sheave elevators tend to have uneven rope tensions.
This also simplifies alignment of the sheave to minimize tracking error.
The second sheave may be at an angle to the first sheave.
The hoist ropes are driven by a drive sheave rotated by an elevator machine.
The secondary sheave shaft is supported in a cantilever fashion vía bearings.
