Examples of 'tapping screw' in a sentence
Meaning of "tapping screw"
tapping screw: A type of screw designed with a pointed end for creating threads in materials like metal or wood by rotating or driving the screw into the surface. This phrase is commonly used in carpentry, construction, and DIY projects where fastening or securing materials together is required
How to use "tapping screw" in a sentence
Basic
Advanced
tapping screw
Tapping screw for plastic.
An alternative method of fixing into concrete is to employ a self tapping screw.
Remove self tapping screw on right side of unit that attaches to the flail screen.
Secure in place with tapping screw K.
The known self drilling tapping screw is suitable for drilling stainless steel sheets.
In this case the frame fixing element is a self drilling and self tapping screw 24.
A bore for receiving a tapping screw extends through the flange and the shaft.
Insert nut in bookshelf, you can put heavier goods different from normal tapping screw.
Remove the tapping screw that holds the pipe support in place and then remove.
Secure the stand using the supplied tapping screw Accessory 4.
Tapping screw Available at the hardware store.
FIG . 6 is a sectional view showing a tapping screw tightened into this insert and into a bone fragment.
Mount the tail cover and tighten the D4 tapping screw.
PWB self tapping screw with flat tail.
As further insurance against their inadvertently coming apart, a self tapping screw 92 Fig.
See also
Remove the tapping screw C then remove the beam.
A, yes, of course, Except bolts for Concrete floor, and self tapping screw for wooden floor.
Remove self tapping screw ( a ) on right side of unit that attaches to the flail screen.
You may add a 1/2in stainless steel self tapping screw to prevent accidental unlocking.
Use 1 Tapping Screw 4 x 8 mm from the INSTALLATION HARDWARE and tighten into place.
Close the tail cover and tighten the D4 tapping screw 1 screw.
Loosen the D4 tapping screw retaining the tail cover.
One Phillips-head tapping screw.
Tapping screw ( 4 mm ) Available in hardware stores.
You may add a 1/2 ” stainless steel self tapping screw to prevent accidental unlocking.
The bore 46 is adapted to receive the threaded fastener 26, which may be a self tapping screw.
Tapping screw ( 5 mm × 9 mm, not supplied with product ) Mounting bracket Dashboard or console.
You'll also be interested in:
Examples of using Tapping
Show more
Clean cartridge by tapping gently on a flat surface
Tapping the potential of the informal sector
I sure as hell was not tapping girls in my bedroom
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
