Examples of 'thickness of the layers' in a sentence
Meaning of "thickness of the layers"
thickness of the layers - refers to the measurement of the distance between surfaces of successive layers, usually in a stratified formation
How to use "thickness of the layers" in a sentence
Basic
Advanced
thickness of the layers
The thickness of the layers may vary.
Recent studies with HiRISE have determined the exact thickness of the layers.
The thickness of the layers is different in different craters.
The soundboard may use multiple layers depending on the thickness of the layers.
The thickness of the layers is also a determining factor.
These data are used to determine the dielectric permittivity and the thickness of the layers.
Nominal thickness of the layers.
The animal uses a biochemical cascade to change the thickness of the layers and their spacing.
The thickness of the layers was controlled using a quartz microbalance.
As they are annually banded, the thickness of the layers are used as climate proxies.
The thickness of the layers was controlled by means of a quartz microbalance.
Moreover, the number of layers depends on the thickness of the layers deposited.
The thickness of the layers depends on the intended use.
Still further, the heat sensitivity is directly proportional to the thickness of the layers.
The thickness of the layers may vary between wide ranges.
See also
This cross-sectional photograph is used to obtain the average thickness of the layers.
The thickness of the layers may vary progressively in a radial direction.
Bias voltages and pulse width ( s ) are dependent on the chosen thickness of the layers.
The number and thickness of the layers can be modified as needed.
Figure 3 shows an alternative form of marker with the thickness of the layers also exaggerated.
The number and thickness of the layers can be adjusted as desired.
These technologies offer the possibility of increasing the thickness of the layers 18 through 21.
The cumulative thickness of the layers formed of the second material are substantially equal.
The calibrating roller 33 adjusts the thickness of the layers with the sauce filling between.
The thickness of the layers of the multilayered structure is not limited to a particular thickness.
Table 2 below gives the nature and the thickness of the layers for the different samples.
The thickness of the layers can be chosen in accordance with the desired effect.
Paint, During painting, the thickness of the layers is measured.
The thickness of the layers in the drawing have been considerably exaggerated for greater clarity.
Furthermore, slight variations of thickness of the layers cause color irregularities ( iridescence ).
The thickness of the layers and the deposition rate is checked using a quartz balance.
The table also gives the thickness of the layers of silicon oxynitride obtained.
The thickness of the layers may vary slightly without adverse effect on the invention.
However, the thickness of the layers may vary.
The thickness of the layers of the multi-layer pipe are sized to be uniform.
On a small scale, the thickness of the layers could create a " step " effect.
The thickness of the layers was as follows,.
For guidance, the thickness of the layers may vary from between 500 nm and 2 um.
Only the thickness of the layers within the PCR are considered in this determination.
The number and thickness of the layers may be adjusted to suit the desired application.
The thickness of the layers was as in example 9.
Also, the thickness of the layers may be relatively limited.
Indeed, the thickness of the layers may be constant or vary throughout the cleaning implement.
Similarly, the thickness of the layers of PVC can be varied according to circumstances.
The thickness of the layers is determined by the glass types, quantities, tex.
The thickness of the layers forming the wells can, for example, be around 5 nm.
The thickness of the layers of the second polymer composition was between 4 and 0.2 microns.
The thickness of the layers 3 and 5 is about five-hundredths of a millimeter to one-tenth of a millimeter.
The thickness of the layers after curing can for instance be lower than 100 µm.
The thickness of the layers may vary depending, in part, on the inter-membrane spacing.
You'll also be interested in:
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
Examples of using Layers
Show more
Layers ribs and onion in slow cooker
Fascia and tissue layers are easy to penetrate
Layers of snow have fallen in the mountains
