Examples of 'thickness of the material' in a sentence
Meaning of "thickness of the material"
This phrase refers to the measurement of how thick or dense a material is. It is often used in engineering or manufacturing contexts to describe the physical thickness of an object or substance.
How to use "thickness of the material" in a sentence
Basic
Advanced
thickness of the material
The thickness of the material is considered nominal.
Em is the optimum average thickness of the material.
The thickness of the material to be measured displaces the other dielectric.
One of them is the thickness of the material used.
The thickness of the material depends on the power of the laser.
Can be adjusted according to the thickness of the material.
The thickness of the material impacts the thermal cure gradient.
The quality of denim is determined by the thickness of the material.
Determine the thickness of the material to be.
This angle is continuous throughout the thickness of the material.
It is expressed as the thickness of the material divided by the thermal conductivity.
Permeation through a material is a function of the thickness of the material.
This depends on the thickness of the material that you choose.
The pressure can be adjusted according to the thickness of the material.
The thickness of the material to be removed from a resonator section generally is slight.
See also
All these variants represent the thickness of the material.
The thickness of the material may also be adjusted to the same ends.
Also influenced by factors such as the thickness of the material itself.
The thickness of the material may also lead to associated problems with abrasion.
The numbers indicate the thickness of the material you will be drilling.
Adjustment of echogenicity may also result from a change in thickness of the material.
The thickness of the material is between a few hundred microns and a few millimeters.
This means the cutting length depends on the thickness of the material.
The irregularity of thickness of the material structure is apt to impair the physicomechanical properties.
This means that the cutting length is dependent on the thickness of the material.
This deformation depends on the thickness of the material and on the angle of stress.
The darkness of the color depends upon the density or thickness of the material.
The thickness of the material exactly fit in with what showed in the specification sheet.
Its thickness is about twice the thickness of the material forming the tube.
The thickness of the material may be varied between upper and lower limits as desired.
The reinforcement is distributed within the thickness of the material of the overlay strip.
Measure the thickness of the material that you will be drilling Pocket Holes into.
Adjust the position of the wiper according to the thickness of the material sewn.
Thus the overall thickness of the material is approximately 1 mm.
The duration of precursor injection depends on the desired thickness of the material deposited.
In particular, the thickness of the material is thus better controlled.
The emission of a broad spectrum allows treatment of the whole thickness of the material.
There is also a relation between a thickness of the material composition and its sorbating capability.
The members usually at least extent to the majority of the thickness of the material.
Advantageously, the thickness of the material strip is not increased by embossing.
Minimum bend radius is a function of the ductility and thickness of the material being worked.
The thickness of the material for which we are searching the refraction index ;.
A high level of elongation becomes particularly important as the thickness of the material utilized increases.
The thickness of the material upon work-hardening is preferably less than or equal to 1 mm.
The rate of heat transfer through a unit thickness of the material per unit temperature difference.
The support may suitably be generally planar with opposed faces defining a thickness of the material.
According to an embodiment, the thickness of the material varies discretely.
Required thickness of the material causing optical distortion and eye strain in operators ;.
Its thickness is approximately twice greater than the thickness of the material constituting the tube.
Indeed, the thickness of the material is controlled throughout the duration of the process.
You'll also be interested in:
Examples of using Material
Show more
Dried material can be removed with acetone
Abstracts must present material in a clear manner
The material scope of immunity ratione personae
Examples of using Thickness
Show more
Minimum recommended thickness of zinc vs thickness of steel
Thickness of tanks made with double walls
Reduction of wall thickness and additional protection
