Examples of 'thread cutter' in a sentence
Meaning of "thread cutter"
A thread cutter refers to a tool or device used for cutting threads, typically in sewing or needlework. It can be a small implement with a sharp edge specifically designed for cutting thread in a precise and efficient manner
How to use "thread cutter" in a sentence
Basic
Advanced
thread cutter
Cut thread on thread cutter on face plate.
Cut excess thread with the thread cutter.
Press the thread cutter button.
Press the ON key to enable auto thread cutter.
Do not press the thread cutter button when.
The thread cutter is the indentation at the rear of the foot bar.
Release the thread cutter button.
The thread cutter may also be secured to a cap for covering the heater.
Screw the new thread cutter onto the.
The thread cutter sign will blink y while the machine cuts the threads.
Cut threads with thread cutter.
Automatic thread cutter and manual thread cutter.
Hook the threads to the thread cutter from back.
Press the thread cutter button and raise the presser foot.
Pull thread through the bobbin thread cutter and cut the thread.
See also
Press the thread cutter button and raise the presser foot to remove the fabric.
Move the threads over the thread cutter in order to cut.
H Thread cutter with curling cut for.
Use this cutter if the thread cutter button is not used.
Press the OFF key to disable auto thread cutter.
Cut threads with thread cutter behind presser bar.
To prevent accidents, do not touch the thread cutter unit a.
Manual thread cutter.
For example, the detachable accessory can be a thread cutter.
Use the face plate thread cutter to cut excess needle thread.
Holding the fabric in one hand, pull the thread chain over the thread cutter B.
Cut both threads using the thread cutter located on the back of.
Press Thread Cutter to automatically cut the top and bobbin threads.
Lower the presser foot and press the thread cutter button again.
Press the thread cutter button to enter the up / down needle position setting.
For your convenience, there is a thread cutter on the left cover.
I Thread cutter with right-handed helical grooves for blind holes.
Cut the threads with the thread cutter at the side of the machine.
The kit according to claim 1, including a thread cutter.
Cut both threads with the thread cutter located on the left side of.
Thread cutter 12, Draw the threads into the slot and pull them toward the front.
Figure 4 shows the two modes of action of the thread cutter of the tool ;.
The Automatic Thread Cutter is a true time-saver. It cuts the top and bobbin thread automatically.
I am Atropos, the thread cutter.
Use the thread cutter on the face cover if the thread is 30 or thicker.
In this case, use the thread cutter H.
In the vicinity of one of the grippers 27 is placed a thread cutter 29.
Built-in thread cutter.
Direct-selection buttons, - Start / stop button - Raise and lower presser foot - Automatic thread cutter - Reverse sewing.
You'll also be interested in:
Examples of using Cutter
Show more
Mounting of cutter blade or nylon cutting head
I organized a crazy cabal of secret cutter interns
Cutter should be fully seated into spindle
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
