Examples of 'thread diameter' in a sentence
Meaning of "thread diameter"
thread diameter: The measurement of the thickness or width of a thread, often used in sewing, textiles, or mechanical engineering to determine size and compatibility
How to use "thread diameter" in a sentence
Basic
Advanced
thread diameter
These units do not directly correspond to thread diameter.
Fine adjustment of thread diameter with spindle and scale.
The second thread has a second thread diameter.
Screw thread diameter.
The nut and washer thickness is equal to the nominal thread diameter.
Thread diameter range.
The mount holes are formed to be a little larger in diameter than a thread diameter.
Known fabrics have included a maximum thread diameter in each mesh count category.
The first thread extending radially outward from the shank to define a thread diameter.
The thread diameter and adaptor nipple size may vary based on the gas required.
Another drawback is that the nominal screw thread diameter becomes very large.
The 1.5 mm thread diameter permits placement in narrow inter-radicular spaces without sacrificing strength.
This has a diameter almost as great as the maximum thread diameter of the rotatable member.
The thread diameter of the 8 mm high metallic neck 53 is about 9 mm.
Die Head is adjustable to obtain proper thread diameter.
See also
Threaded portion 144 has major thread diameter MTD and minor thread diameter RTD.
There were differences in head shape, rod diameter, and length and thread diameter.
For a outside thread diameter 30 mm / for w inside diameter of filling opening 18 mm.
Pick list Diameter Defines the thread diameter.
The thread diameter may range from about 30 microns to about 50 microns.
Washers outside diameter ~ 3 x thread diameter.
Observe thread diameter and max . reach of screw in the pressure flange ( 2 ) according to Table 3.
Use screws with a wood / plastic thread and a thread diameter of 2 mm.
Enlarged shank 150 has an outer diameter BD2 that is larger than major thread diameter MTD.
Dishwasher bottom filter attachment screw. Lenght 46mm, thread diameter 8mm. Original spare part.
The depth of engagement should be at least 1.25 x the thread diameter.
Lens hood mount, Bayonet Filter mount thread diameter, 58 mm.
In the present example, the effective length LE is 725 % of the nominal thread diameter DNT.
Recess 154 has an outer diameter BD3 that is smaller than minor thread diameter RTD.
Recess 146 has an outer diameter BD1 that is smaller than major thread diameter MTD.
You'll also be interested in:
Examples of using Diameter
Show more
A change in wire diameter results in changed parameters
Diameter of and pressure in the fire mains
The incoming hole diameter on auxiliary terminal
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
