Examples of 'thread size' in a sentence
Meaning of "thread size"
thread size: This term is commonly used in the context of sewing, knitting, or construction to refer to the thickness or fineness of a thread, yarn, or screw thread, which can impact the strength and durability of the material
How to use "thread size" in a sentence
Basic
Advanced
thread size
Needle and thread size should correspond.
Fast and easy adjustment of thread size.
Match needle size to thread size and weight of fabric.
Material measurement finish color thread size.
Size across flats thread size use with this rod size.
Die heads using Bolt dies require a dedicated set of dies for each specific thread size.
The preferred method of checking thread size is with a ring gauge.
Our factory provides different thread size,.
Part to be tightened Thread size Tightening torque.
Used to install and remove the V-MAG neodyme 70 KG magnets with thread size Ø 6 mm.
Your camera's lens thread size will be marked.
Always use the arbor nut that has same thread size as spindle.
To select the proper thread size and thread pitch, three different situations are considered.
Maximum gap fill Maximum thread size.
To enlarge or reduce the thread size in the connection of clamps, etc.
See also
Fabric Needle size thread size.
The screws may have coarse thread size to accommodate misalignment of the die-cast holes.
To make sure you order the correct parts always check thread size before ordering!
E is the thickest thread size on down to 00 which is the thinnest.
The thread becomes thinner as the thread size number becomes larger.
Select the correct needle and thread size from the above chart.
B Diameter of mounting bolt holes or thread size in case of threaded holes.
Always cut a test thread to confirm proper thread size after changing / adjusting the dies.
It is important that you use the same thread size for upper - and lower thread.
This shows that the conventional 20.32 thread size physically can not be used.
You'll also be interested in:
Examples of using Size
Show more
Change duct size gradually to minimize turbulence
I do not want a comedian knowing my dress size
Size expressed as minimum and maximum weight
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
