Examples of 'thread take-up' in a sentence
Meaning of "thread take-up"
thread take-up: a term associated with sewing or embroidery that describes the process of pulling up the bobbin thread to the top of the fabric before stitching
How to use "thread take-up" in a sentence
Basic
Advanced
thread take-up
Adjust the lower thread take-up timing correctly.
Make sure to guide the thread through the thread take-up lever.
When the looper thread take-up q is at its highest posi.
Be careful to avoid injury from the moving thread take-up and pulley.
The looper thread take-up is installed in the following position.
Reduce the tension of the thread take-up springs.
Make the thread take-up spring tension as weak as possible.
Pass the thread through the looper thread take-up lever lower.
Raise the thread take-up lever to the highest position.
Pass the thread through the looper thread take-up lever upper.
Raise the thread take-up lever q before threading the upper thread.
Turn the hand wheel until the thread take-up lever reaches the.
Set the thread take-up lever to its highest position at the sewing start.
Positioning the looper thread take-up and thread guides.
Place the thread take-up lever at the lowest position, and lower the presser bar lifter.
See also
Remove the thread from all points from the thread take-up lever to the needle.
The needle thread take-up q is positioned in about the middle of the arm slit e.
Skipped stitches occur while sewing The lower thread take-up timing is incorrect.
Usually the thread take-up lever is reciprocated in a vertically extending slit formed in the frame.
Press the Up / Down needle key to raise the thread take-up lever to its highest position.
Are the thread take-up spring tensions too strong?
Press the Up / Down needle button to raise the thread take-up lever to its highest position.
Move the thread take-up lever ( 1 ) up or down to adjust the upper thread feeding amount.
Adjusting the pressure of thread take-up spring 1.
Looper thread take-up lever upper.
Safety devices q finger guard w thread take-up cover, etc.
A thread take-up device which is designed to prevent clinging thread is shown in Figs . 11 to 14.
Lower the position of the thread take-up spring to as low a position as possible.
To decrease the amount of thread, move looper thread take-up.
Adjust the upper thread take-up guide position correctly.
Loosen the set screw r, and then move the needle thread take-up q to adjust.
Turn the machine pulley and raise the thread take-up ( 1 ) before threading the upper thread.
For example, fluffy or hard-twist thread tends to cling to the thread take-up lever 9.
Adjusting the stroke of thread take-up spring 1.
Pull the thread underneath the thread take-up spring 19 and pass it.
To adjust the operation range of the thread take-up spring, loosen the screw.
Do not touch any moving parts, such as the thread take-up lever, handwheel or needle.
Safety devices q Finger guard w Thread take-up cover e Belt cover, etc.
Fig . 2, is a top view of the type of thread take-up lever described above.
To increase the amount of thread, move looper thread take-up 9 and 11 in the direction of.
You'll also be interested in:
Examples of using Take-up
Show more
The power take-up was rising normally and
A positive exit corresponds to the take-up of an offer
Launch take-up initiatives addressing issues such as
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
