Examples of 'thread spool' in a sentence
Meaning of "thread spool"
A thread spool refers to a cylinder-shaped object that holds thread, yarn, or string. It is commonly used in sewing or embroidery to keep the thread organized and easily accessible. The phrase 'thread spool' refers to this specific object.
How to use "thread spool" in a sentence
Basic
Advanced
thread spool
Thread spool does not have sufficient line.
Positioning the additional thread spool carrier.
Place a thread spool on the spool pin.
The hole should face the thread spool.
Set the thread spool on the spool pin.
The warranty does not cover normal wearing of the thread spool.
Firmly place the thread spool in the spool cover.
Slide a spool with thread onto the horizontally located thread spool.
Hold the thread spool roll as shown in the illustration.
A typical ear tube grommet is shaped similarly to a thread spool or wire spool.
Put a thread spool and spool cap on to the spool pin.
Place the second spool of thread onto the vertical thread spool carrier.
When the thread spool is empty replace it by a genuine thread spool.
Select the spool cap that matches the circumference of the thread spool to be used.
Press the thread spool cover down until in snaps into place.
See also
The sticks should be parallel and far enough apart to put a thread spool between them.
Check the thread spool to see that it has not caught in any way.
Leave an opening of 2mm between the thread spool and spool cap.
The cutouts on the thread spool cover need to be aligned with the locking tabs j.
Put the spool cover together with thread spool on the spring 19.
Place the top thread spool on to the holder that is there for this purpose.
Place another felt cushion ( h ) and another spool of thread ( m ) on the right thread spool pin.
Wind the thread tautly on the thread spool roll by rotating the roll clockwise.
Thread spool cap ( Small ) Petite bobine Tapa de la bobina pequeña.
Secure the spool with a thread spool holder x / c of the appropriate size.
Proceed according to the directions on page 11, " Setting up the thread spool pins.
Tip the thread spool carrier 5 upwards and fix a spool of thread on.
Fuelling Check the thread spool / cutting blade.
If the thread spool has a thread retaining slit, it should be placed to the right.
Includes 50 gr food thread spool.
When using sewing thread spools, the thread spool cap should be used as illustrated below.
Remove the thread release stylus ( M ), compression spring ( N ) and the thread spool O.
Replace the thread spool / cutting blade.
Screw the thread spool ( 6 ) counter clockwise on the drive shaft H.
For a large thread spool & 31 ; Leave a space of 2mm between the thread spool and spool cap.
Screw the thread spool ( 8 ) on the drive shaft I.
You'll also be interested in:
Examples of using Thread
Show more
Insert washer and thread nut to screw
Thread mount available for optional accessories
Put a spool of thread on the spool pin
Examples of using Spool
Show more
Put a spool of thread on the spool pin
Check to see if the spool is properly wound
Move spool holder to remove both spools
