Examples of 'tighten screw' in a sentence
Meaning of "tighten screw"
tighten screw: action of making a screw or fastener more secure by turning it clockwise, typically done using a screwdriver or wrench
How to use "tighten screw" in a sentence
Basic
Advanced
tighten screw
Firmly tighten screw on mounting bracket torque.
Adjust to width of cut and tighten screw.
Tighten screw when leveling operation is completed.
Replace face plate and tighten screw.
Be sure to tighten screw when leveling is completed.
Replace the cover and tighten screw.
Tighten screw see the page on torque.
Reposition retention arm and tighten screw.
Tighten screw lightly until resistance is felt.
Tilt cover up and tighten screw securely to base.
Tighten screw to reduce flame height.
Do not fully tighten screw yet.
Tighten screw until heater is firmly secured to wall.
Replace the battery door and tighten screw.
Firmly tighten screw inside chuck.
See also
Adjust to desired exhaust direction and tighten screw.
Securely tighten screw for proper electrical connection.
Replace door and tighten screw.
Tighten screw on arch hub into downrod to hold in place.
Reinstall the air cleaner cover and tighten screw.
Do not fully tighten screw until end of this step.
Install the wire compartment cover and tighten screw.
Tighten screw fully so it is well recessed into handle insulation.
Replace wiring compartment cover and tighten screw to secure.
Tighten screw loosened earlier to secure belt tension spring to the transmission.
Put the cover back in place and tighten screw.
Tighten screw of clamping device until bolt head and end of cover are aligned.
Replace door stop screw in bottom hinge and tighten screw.
Tighten screw securely with a Phillips screwdriver.
Rotate guard under table to a closed position and tighten screw.
Tighten Screw as far as possible to ensure maximum pressure.
Close the battery compartment door and tighten screw to secure.
Tighten screw to reduce the flame height ;.
Adjust the decorative flue to the desired lenght and tighten screw.
Use Allen wrench to tighten screw onto the flat on the shaft.
Set the cross bar at desired distance from blade and tighten screw.
Tighten screw to pass it through the hook, on both sides.
Carefully wrap pigtail of quartz tube clockwise around screw and tighten screw.
When housing is properly adjusted, tighten screw in slots to secure housing.
Push the handlebars onto the fork shaft until the stop and tighten screw.
Tighten screw 7 ensuring that the rod that has the safety bore becomes pressed.
Push the lamp socket back into the original position and tighten screw C.
Tighten screw 3 into the machine base.
Loosen screw Adjust air shutter opening Tighten screw.
Do not com plete ly tighten screw ( g ) at this time.
Move indicator to the 0 mark and securely tighten screw.
Do not tighten screw terminals more than 9 in-lbs.
Replace the fan blades, tighten screw and.
Tighten screw [ 1 ] to ensure tightness and correct electrical contact.
Replace the fan blade, tighten screw and.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
