Examples of 'tighten or loosen' in a sentence
Meaning of "tighten or loosen"
tighten or loosen - a phrase commonly used when referring to adjusting or changing the tightness or looseness of something, such as a screw, bolt, or any other object that can be tightened or loosened by twisting or turning
How to use "tighten or loosen" in a sentence
Basic
Advanced
tighten or loosen
Twist tool slightly to tighten or loosen connection.
Tighten or loosen the tapes as required then reattach them.
We can just tighten or loosen it to suit.
Then use the nut driver to tighten or loosen.
You can also tighten or loosen the velcro as needed.
Connect the sternum strap buckle and tighten or loosen as needed.
To tighten or loosen the fit of the outer armpost in the receiver.
Twist wand or tool slightly to tighten or loosen the connection.
Tighten or loosen the harness straps by sliding the harness adjusters.
Do not use a wrench to tighten or loosen the chuck jaws.
Tighten or loosen the strap to restrict or extend the angle of rotation.
Do not use pliers to tighten or loosen high pressure connections.
Tighten or loosen the screws as desired until the system is secure on the wall.
This means that it can tighten or loosen more effectively.
Never tighten or loosen the clamp while the pump is operating.
See also
Locks the saw blade to tighten or loosen the blade screw.
Do not tighten or loosen the tips when the handpiece is activated.
The pivot bolt can be adjusted to tighten or loosen the hinge.
A quarter turn to tighten or loosen the adapter may be necessary to avoid this.
Release the button and allow the handle to seat to tighten or loosen an adjustment.
It can tighten or loosen.
Two buttons on the side allow the wearer to tighten or loosen the fit.
Continue to tighten or loosen this adjustment until the feed belt tracks properly.
A similar procedure is performed to either tighten or loosen each of the other nuts.
Tighten or loosen the belt by moving the webbing through the adjustment ring.
Do not use the machine to tighten or loosen fittings on the thread.
Tighten or loosen the adjusting screws and keep in mind that the pressure for each.
Band adjustments are needed to tighten or loosen the band to maintain pressure.
Tighten or loosen all screws with a Phillips screwdriver.
Always use two wrenches to tighten or loosen the propane gas supply line connections.
Never use a wrench or means other than a chuck key to tighten or loosen the chuck.
Tighten or loosen the adjustment ring to adjust the camera 's position.
Furthermore the ability to simultaneously tighten or loosen two fasteners increases efficiency and productivity.
But it looks like if you turn it, it can tighten or loosen.
To tighten or loosen the upper 3, a reversible tightening arrangement has been provided.
Use a small Phillips screwdriver to tighten or loosen the screw for friction strip.
Note, Tighten or loosen screws with a Phillips screwdriver or the assembly tool.
Push tool firmly onto hose ; twist tool slightly to tighten or loosen connection.
No need to tighten or loosen the security . No need to do anything.
With the guard latch in the closed position tighten or loosen the adjustment screw Fig . 2B.
To adjust, tighten or loosen the two adjusting screws C.
To adjust the trigger ( K1 ) it is necessary to tighten or loosen the screw K2.
Wrench - Use wrench to tighten or loosen positive and negative terminal outputs.
Tighten or loosen the screws ( C ) a small amount using a small Phillips screwdriver.
See here . We can just tighten or loosen it to suit.
G Note, Tighten or loosen all screws with a Phillips screwdriver.
Use the wrench ( A ) to tighten or loosen the adjustment screw H.
Tighten or loosen the adjusting screws 3.
To adjust, tighten or loosen the nut D.
To tighten or loosen the upper 3, a reversible tightening mechanism is provided.
You'll also be interested in:
Examples of using Loosen
Show more
Loosen the screw at the rod extensions
Use a screwdriver to loosen the air shutter
Loosen the lower pin with a key
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
