Examples of 'tighten the cable' in a sentence
Meaning of "tighten the cable"
tighten the cable: involves adjusting or securing a cable or wire to make it taut, firm, or stable in its position or connection
How to use "tighten the cable" in a sentence
Basic
Advanced
tighten the cable
Install and tighten the cable clamp.
Tighten the cable cover screws.
Check and tighten the cable.
Tighten the cable using the registering screw.
Use the adjustable sleeve to tighten the cable.
Tighten the cable ties on the insulation pieces.
Rotate the hand crank clockwise to tighten the cable.
Tighten the cable glad to prevent water penetration.
Turn the connector clockwise to tighten the cable to its place.
Tighten the cable clamp bolt.
Install the cable cover and tighten the cable cover screws.
Tighten the cable grip.
Pull the cable taught and tighten the cable clamp bolt.
Tighten the cable gland on the top of the immersion tube.
A motor rotates the cable in a direction tending to tighten the cable fibres.
See also
Tighten the cable screws to secure the cable to the connector.
The transmitter in place and tighten the cable tie around the crank picture 2.
Tighten the cable gland in order to seal the cable entry.
If the wheels do not spin, tighten the cable even more using the turnbuckle.
Tighten the cable clamps onto the bare cable shields.
If the auger does not turn, tighten the cable even more using the turnbuckle.
Tighten the cable ties securely and cut off any excess cable tie ends.
Use cable with sufficient wire cross-section and tighten the cable entry.
Please tighten the cable screws after inserting the plug.
Use the recommended cables ( see chapter " Connecting to power supply " ) and tighten the cable gland.
Then tighten the cable clamp to secure the cable to the gearmotor.
You can now tighten the cable ties and cut off the ends.
Tighten the cable setscrew to securely hold the welding cable / crimped sleeve.
Tighten the cable holder, flexible pipe and elbow with the hose band.
Tighten the cable ties, and use a scissor to cut off the remaining part.
Tighten the cable glands in accordance with the torques specified in Transmitter Page 12.
Tighten the cable gland, replace cover on body and screw in 6 cover 's screws.
Tighten the cable gland of the antenna with a torque of 20 Nm.
Tighten the cable glands in accordance with the torques specified in Chapter " Technical data Page 35.
Tighten the cable clamp ( 8 ) with its own screws.
You'll also be interested in:
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
Examples of using Cable
Show more
Secure the coaxial cable to the ceiling
A cable tie is provided with the appliance
Use plenum rated cable where it is required
