Examples of 'tighten the chuck' in a sentence
Meaning of "tighten the chuck"
tighten the chuck: This phrase is often used in mechanical contexts, such as working with tools. It means to secure or fasten a chuck, which is a type of clamping device used to hold a workpiece or tool firmly in place
How to use "tighten the chuck" in a sentence
Basic
Advanced
tighten the chuck
Securely tighten the chuck retaining screw.
Do not use a wrench to tighten the chuck.
Firmly tighten the chuck by pressing the.
Turn the sleeve clockwise to tighten the chuck.
Tighten the chuck by turning the sleeve.
Rotate the chuck body to close and tighten the chuck jaws.
Tighten the chuck collar by hand.
Attach a new chuck to the spindle and tighten the chuck screw.
This will tighten the chuck on the spindle.
Some power drills require a special tool to firmly tighten the chuck.
Tighten the chuck jaws securely on the bit.
This means that it is unnecessary to tighten the chuck around the bit.
Tighten the chuck jaws on the drill bit.
Rotate the chuck counterclockwise to tighten the chuck jaws securely on the bit.
Tighten the chuck securely by rotating the chuck head.
See also
Install the appropriate bit into the chuck and tighten the chuck.
Firmly tighten the chuck by pressing the manual spindle.
Hold the tool firmly turn the sleeve clockwise to tighten the chuck.
Tighten the chuck by turning the chuck sleeve firmly.
Now at each drill hole tighten the chuck evenly with the chuck key.
Tighten the chuck around the shorter end of hex key.
Insert the hex key into the chuck and tighten the chuck jaws securely.
Firmly tighten the chuck by turning the front part.
Push the Chuck into the Sharpening Port until it stops and tighten the Chuck.
Tighten the chuck securely by rotate the chuck head in a clockwise direction.
When attaching accessories in the drill chuck, it is important to securely tighten the chuck.
Tighten the chuck around the shorter end of a hex key not supplied.
This first air pressure introduced through the nozzle therefore tends to tighten the chuck 6.
It is important to tighten the chuck with all three key holes to prevent slippage.
With your other hand, rotate the chuck body to close and tighten the chuck jaws.
Tighten the chuck collar by hand until the shank is firmly gripped in the jaws.
Insert the bit shaft ( 10 ) into the chuck and firmly tighten the chuck.
Tighten the chuck sufficiently to prevent the bit slipping in the jaws during drilling.
Insert the bit shaft ( 10 ) into the chuck and fi rmly tighten the chuck.
Tighten the chuck just to the point that the bit slides in and out.
Using a screwdriver, tighten the chuck screw by turning in a counterclockwise direction.
Tighten the chuck against the drill as described below Keyless chuck.
It 's important to tighten the chuck with all three holes to prevent bit slippage.
Tighten the Chuck just to the point where the bit slides in and out.
After the click, always tighten the chuck additionally to prevent accidental loosening during operation.
Tighten the Chuck once more to ensure the bit will not move when you sharpen it.
Firmly tighten the chuck (5) by turning the front part anti.
Tighten the Chuck Jaws by rotating the Chuck clockwise.
Firmly tighten the chuck by turning the front part clockwise as viewed from the rear.
Tighten the chuck jaws by rotating the front chuck ring anti-clockwise.
Tighten the chuck jaws securely on the drill bit, using the chuck key provided.
Tighten the Chuck Knob while it 's still in the Sharpening Port.
You'll also be interested in:
Examples of using Chuck
Show more
Chuck had a japanese stewardess over today
To ensure that the chuck is securely fitted
Chuck wanted to see the studio again
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
