Examples of 'tighten the fixing' in a sentence
Meaning of "tighten the fixing"
tighten the fixing - secure or fasten something firmly in place~ used in the context of repairing or adjusting objects or equipment
How to use "tighten the fixing" in a sentence
Basic
Advanced
tighten the fixing
Then tighten the fixing screw again.
When correct alignment is achieved tighten the fixing bolt.
Tighten the fixing screw to secure the dome.
Position the clamp and tighten the fixing screw securely.
Tighten the fixing screws alternately in a diagonal sequence.
Put the battery flap back in place and tighten the fixing screws.
Tighten the fixing screws using the torque.
Mount the binding unit at your desired position and tighten the fixing bolts.
Now tighten the fixing screws.
Return the controller hanger to its proper position and tighten the fixing bolt.
Tighten the fixing screw again when finished.
Fit the cover back over the air cleaner and tighten the fixing bolt.
Do not tighten the fixing screws until you have.
Refit the protective casing, and tighten the fixing screws.
Tighten the fixing nut in order to fix the position.
See also
After fitting the implement on the shaft, tighten the fixing screws carefully.
Tighten the fixing screw fully down with a hex wrench.
Place the silicone cover on the batteries, close the cover and tighten the fixing screw.
Tighten the fixing bolt or nut with the box wrench.
Set the camera on the bracket, adjust the camera inclination, and tighten the fixing screw.
Tighten the fixing nut to fasten the cable adjusting bolt.
Assemble in reverse order and tighten the fixing screw 14.
Tighten the fixing anglescrews in order to fix the depth adjustment.
Reinstall the outer flange 21 and tighten the fixing bolt with.
Tighten the fixing screw by turning against the running direction.
Having checked that the grass-catcher rotates as above, tighten the fixing nuts ( 4 ) securely.
Do not over tighten the fixing ring to stop the movement.
Tighten the fixing screws on the top and bottom of the case.
Open the drawer and tighten the fixing anglescrews in order to fix the depth adjustment.
Tighten the fixing nut which is at the top in order to fix the position.
Afterwards, tighten the fixing screws again carefully.
Tighten the fixing screw by hand to set the tripod in current horizontal position.
Securely tighten the fixing screws using the supplied hexagonal wrench.
Tighten the fixing of rubber sleeves in rigid and adjustable lateral control rods.
Fully tighten the fixing screws 2.
Then tighten the fixing cylinder so that the camera remains in the desired position.
Fully tighten the fixing screw 2.
Tighten the fixing screw by hand that the accessory ist fixed in a secure way.
Then tighten the fixing screw so that the camera remains in the desired position.
Tighten the fixing screws towards the head of the membrane dryer using an Allen key.
Tighten the fixing plates / retaining grip screws.
Tighten the fixing plate / retaining grip screws.
Tighten the fixing flange 14 using a pin spanner.
Tighten the fixing screws using a tightening torque of 10 Nm.
Tighten the fixing screws of the microswitch ( 22 ) holding bracket.
Tighten the fixing screw ( 3 ) on the hot-shoe adapter to secure the receiver on the cam.
You'll also be interested in:
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
Examples of using Fixing
Show more
I was fixing the roof and got hurt
There is no one better at fixing relationships than me
Fixing the air for your mom
