Examples of 'tighten the clamp' in a sentence
Meaning of "tighten the clamp"
tighten the clamp - This phrase is an instruction to secure or fasten a clamp by making it stricter or more resistant. It is often used in mechanical or construction settings
How to use "tighten the clamp" in a sentence
Basic
Advanced
tighten the clamp
Then tighten the clamp screw securely.
Close the clamp and tighten the clamp screw.
Then tighten the clamp nut securely.
Replace the spark arrestor and tighten the clamp.
Tighten the clamp nut with a wrench.
Do not over tighten the clamp.
Tighten the clamp screws evenly until tight.
Close the clamp or tighten the clamp screw firmly.
Tighten the clamp screws securely.
Turning the handle clockwise will tighten the clamp.
Lightly tighten the clamp screws.
Install the pen in the clamp and tighten the clamp screw.
Tighten the clamp screw when done.
Use the spanner provided as you tighten the clamp nut in a clockwise direction.
Tighten the clamp lever up again.
See also
Hold the limit switch tightly in this position and tighten the clamp.
Do not tighten the clamp knob.
You may also use the drill chuck key to tighten the clamp.
Always tighten the clamp bolt.
Adjust the depth gauge to the desired depth and tighten the clamp screw.
Tighten the clamp before you start sawing.
Move the spray gun to its original position and tighten the clamp knob.
Tighten the clamp nut with the proper wrench.
Close the blade cover and tighten the clamp screw to secure the blade cover.
Tighten the clamp to keep the gauge in this position.
Feed the cable into the metal clamp and tighten the clamp around the shielding.
Tighten the clamp nut securely with the wrench provided.
Use an Allen key to tighten the clamp around the wheelchair handle.
Tighten the clamp bolt and note the position on the grade rod by the rabbet.
After adjusting, tighten the clamp screw.
And then tighten the clamp screw clockwise to secure the dust extractor attachment.
When you're finished tighten the clamp again.
Firmly tighten the clamp screw on the turn base so that.
To secure the side handle, tighten the clamp nut securely.
Tighten the clamp until the screw head is less than 4 mm from the hose.
Using a phillips screwdriver, tighten the clamp collar to ensure adequate sealing.
Tighten the clamp screw last 3.
After adjusting to the prescribed cutting depth, tighten the clamp lever securely.
Then tighten the clamp nut securely . Fig.
While depressing the spindle lock button, tighten the clamp nut with a wrench.
Step 5 - Tighten the clamp screw by turning it clockwise as indicated by the arrow.
Using a Phillips screwdriver, tighten the clamp collar to ensure.
Do not tighten the clamp adjusting screw ( B ) with the clamp lever in open position.
Attach the Chipper Chute to the Chipper Tube and tighten the clamp see Fig 2.
NOTICE, Do not tighten the clamp adjusting screw with the clamp lever in open position.
Attach hose to 90 elbow hose barb fitting and tighten the clamp.
Tighten the clamp screws evenly, until the J-handle is secure.
Insert the 90 elbow into the rubber coupling, and tighten the clamp.
Tighten the clamp adjusting screw ( B ) to ensure shroud is secured to gear case.
Loosen the clamp screw, set to desired position, then tighten the clamp screw.
You'll also be interested in:
Examples of using Clamp
Show more
Do not subject the clamp to running water
You clamp the top of your throat
Then tighten the clamp screw securely
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
