Examples of 'tighten the screws' in a sentence
Meaning of "tighten the screws"
To secure or fasten screws firmly by turning them to a greater degree, usually used metaphorically to mean taking stricter or more forceful action
How to use "tighten the screws" in a sentence
Basic
Advanced
tighten the screws
Do not tighten the screws firmly yet.
Battery cover and tighten the screws.
Do not tighten the screws at this stage.
This makes it possible to tighten the screws.
Tighten the screws after making adjustments.
Do not over tighten the screws.
Tighten the screws to secure the camera.
Be sure to tighten the screws firmly.
Tighten the screws for a secure fit.
Position and tighten the screws.
Tighten the screws to lock in the adjustment.
Be careful not to tighten the screws too much.
Tighten the screws to ensure a secure connection.
Do not fully tighten the screws.
Tighten the screws to secure the canopy.
See also
We recommend a fl athead screwdriver be used to tighten the screws.
Do not tighten the screws too much.
Use a screwdriver to tighten the screws.
Firmly tighten the screws using a screwdriver.
We recommend a flathead screwdriver be used to tighten the screws.
Hand tighten the screws on the dome.
Adjust the door and tighten the screws.
Firmly tighten the screws on the brace.
Replace the cover and tighten the screws.
Tighten the screws on the rotisserie forks.
Insert the battery and tighten the screws.
Tighten the screws on both sides again.
Install new die and tighten the screws.
Tighten the screws to secure the connection.
Check the connection and tighten the screws.
Tighten the screws securely and evenly.
Adjust the clearance and tighten the screws.
Tighten the screws with your hands.
Put the cover on and tighten the screws.
Tighten the screws securely after adjustment.
Replace the back and tighten the screws.
Tighten the screws when alignment is perfect.
Push chain guide in and tighten the screws.
Do not tighten the screws to the end.
Install the cover and tighten the screws.
Tighten the screws of the new lamp unit.
Assemble the starter and tighten the screws.
Tighten the screws with a screwdriver.
Replace the flap and tighten the screws.
Tighten the screws to complete fixing.
Reclose the cover and tighten the screws.
He might tighten the screws on us in return.
Reposition the battery holder and tighten the screws.
Do not fully tighten the screws at this point.
Attach the dome cover and tighten the screws.
You'll also be interested in:
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
