Examples of 'tighten the screw' in a sentence
Meaning of "tighten the screw"
tighten the screw: a phrase meaning to make a situation more strict, controlled, or secure, often by increasing regulations, enforcement, or measures
How to use "tighten the screw" in a sentence
Basic
Advanced
tighten the screw
Tighten the screw through the clips.
Now you can tighten the screw.
Tighten the screw to keep it from slipping.
Do not fully tighten the screw yet.
Tighten the screw to secure the lead.
Do not completely tighten the screw yet.
Tighten the screw to secure the punch.
You can easily tighten the screw by fingers.
Tighten the screw to themagnet with a screwdriver.
Position and tighten the screw.
Tighten the screw on the fixing plat.
Afterwards tighten the screw again.
Tighten the screw closest to the blade.
Adjust and tighten the screw.
Tighten the screw using a hex wrench.
See also
Use the screwdriver to tighten the screw securely.
Tighten the screw properly when reassembling.
Replace and tighten the screw.
Tighten the screw on the conduit connector.
Fit and tighten the screw.
Tighten the screw of the spring washer.
Attach battery cover and tighten the screw.
Securely tighten the screw before use.
Use a screwdriver to tighten the screw.
Tighten the screw to secure the support.
Refit the cover and tighten the screw.
Tighten the screw by turning in a counterclockwise direction.
Replace the cover and tighten the screw.
Tighten the screw on the back of transmitter.
Replace the tip and tighten the screw.
Then tighten the screw to hold it in place.
Replace battery door and tighten the screw.
Tighten the screw that is now exposed.
Please be sure to sufficiently tighten the screw connections.
Tighten the screw at the bottom of the thermostat.
Reposition the cover and tighten the screw.
Tighten the screw until snug.
Adjust the clearance and tighten the screw.
Tighten the screw properly when re as sem bling.
Adjust the position and tighten the screw as necessary.
Tighten the screw on the needle holder securely.
Slide the cover back on and tighten the screw.
Be sure to tighten the screw securely.
Close the plastic cover and tighten the screw.
Also tighten the screw holding the magnet.
Close the battery compartment and tighten the screw.
Tighten the screw at the depth gauge firmly.
Install the terminal cover and tighten the screw.
Tighten the screw by turning it clockwise with a screwdriver.
Insert screwdriver through insert hole to tighten the screw.
You'll also be interested in:
Examples of using Screw
Show more
Tighten the screw through the clips
Screw the two sections of pole together
Remove the screw on the rear coupler
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
