Examples of 'tighten the nuts' in a sentence
Meaning of "tighten the nuts"
The phrase 'tighten the nuts' is a figurative expression that means to secure or fix something firmly. It originated from the literal act of tightening nuts and bolts, and is now commonly used to describe the process of ensuring that all necessary elements or components are firmly in place
How to use "tighten the nuts" in a sentence
Basic
Advanced
tighten the nuts
Replace and tighten the nuts to secure.
Tighten the nuts to secure the base.
Use a spanner to finely tighten the nuts.
Tighten the nuts progressively and evenly.
The washers on and tighten the nuts.
Tighten the nuts using a socket spanner.
Level the range hood and tighten the nuts.
Do not tighten the nuts at this time.
Reinstall the battery set plate and tighten the nuts.
Tighten the nuts of the hose by hand.
Replace the bolts and washers and tighten the nuts.
Tighten the nuts when adjustment is finished.
Use the lug wrench to tighten the nuts in the order shown.
Tighten the nuts of connection terminals securely.
Fit the chain cover back on and tighten the nuts by hand.
See also
Tighten the nuts and bolts quickly.
Use a screwdriver to hold the screw and firmly tighten the nuts.
Tighten the nuts firmly by hand.
Slide the yoke in the desired position and tighten the nuts.
Do not tighten the nuts yet.
Place a nut onto each of the screws and securely tighten the nuts.
Tighten the nuts with the tool supplied.
Install battery cables as shown and tighten the nuts on the battery terminals.
Tighten the nuts provided to fix everything in place.
Maybe whoever maintains the roll coaster uses a pipe wrench to tighten the nuts.
Tighten the nuts with wrench.
Place the lower handlebar and once the screws have been inserted tighten the nuts.
Tighten the nuts finger tight.
Mount the crank handle Tighten the nuts firmly.
Then tighten the nuts by hand as tight as you can.
B Connect the other end of the pipe to the water inlet and tighten the nuts.
Tighten the nuts and check the clearance again.
If the lateral alignment is correct, tighten the nuts.
Tighten the nuts well for minimal contact resistance.
Never attempt to tighten the nuts on the shear screws «.
Tighten the nuts against the clevises to secure their locations.
When the adjustment has been completed, tighten the nuts.
Screws tighten the nuts at the current holder slightly.
Once the adjustment has been made, tighten the nuts.
Tighten the nuts with the tool shown in the picture.
To increase pressure, tighten the nuts on each side of the swing arm.
Tighten the nuts of the connecting bolts with a torque wrench.
Make sure the installation is fi rm, but do not over tighten the nuts.
Tighten the nuts securely with the bar tip held up.
Then hold the cam in position and tighten the nuts 5 Nm.
Hand tighten the nuts attaching the center and bottom brackets.
When the adjustment has been made, tighten the nuts 2.
Tighten the nuts at the threaded end of the cable to adjust them.
Now, you see, you gotta tighten the nuts just right.
Tighten the nuts with the tightening torques of the appropriate pressure rating.
You'll also be interested in:
Examples of using Nuts
Show more
Soak nuts and seeds before blending
Tighten the small nuts with a spanner
Place nuts in recessed areas on front of handle
Examples of using Tighten
Show more
Tighten the screw through the clips
I will just tighten these up for you
Tighten properly the connection block screws
