Examples of 'tightening screws' in a sentence
Meaning of "tightening screws"
tightening screws: An expression often used metaphorically to mean making something more secure, complete, or organized
How to use "tightening screws" in a sentence
Basic
Advanced
tightening screws
Check with a level before tightening screws.
Tightening screws into molded plastic.
Make sure lock is straight before tightening screws.
Preferably two tightening screws are configured symmetrically to the barrel axis.
Secure disconnect switch bracket in place by tightening screws.
The tightening screws are advantageously accessible from the interior of the mandrel.
Safety standards and without projecting tightening screws.
Drilling and tightening screws are performed with lever in extreme position to the left.
This jaw is applied by tightening screws.
Each of the two tightening screws is screwed inside a cylinder driven into the bottom plate.
Replace belt cover by installing cover and tightening screws.
I was tightening screws in the Mars rover room.
Make sure all screws are in place before tightening screws.
Tightening screws in austenitic stainless steel, nuts in nickel plated brass.
Make sure to center bezel on valve before tightening screws.
See also
Tightening screws into easily breakable materials, such as thin plastics.
Level the back frame before tightening screws completely.
When tightening screws and nuts, always begin with the.
Make sure both sides are adjusted symmetrically before tightening screws.
S Secure harness clamp by tightening screws with a hex wrench.
The edge of the ring is crenelated to allow access to the tightening screws.
Wolf 's team was tightening screws on the way to the airport to meet the deadline.
Level the plastic mounting bracket before tightening screws completely.
Loosen the tightening screws on the headshell and remove the connection-cables of the pick-up system.
This tool is fitted with a collar to set the torque for tightening screws.
Over-tightening may occur when tightening screws into soft materials as the tool does not impact.
This tool is equipped with a collar to set the torque for tightening screws.
Hint, For loosening and tightening screws use bottom of the wrench.
The two bases are respectively secured to the bottom plate by two tightening screws.
At the same time, access to the tightening screws is facilitated.
To prevent this, you should maintain your doors by cleaning rollers and tightening screws.
The wrench provided is for tightening screws during " Required Daily Testing.
Secure the remaining scale clamps by gradually and alternately tightening screws A and.
Initially, the tightening screws of the disk 3 are loosened slightly.
When the hood has been leveled, secure unit by tightening screws.
Tightening screws into lightweight steel sheet which thickness is 0.8 mm or less.
Always follow the manufacturer ‘ s instructions for tightening screws or nuts.
For drilling, for tightening screws and for chiselling, use forward ( clockwise ) rotation.
The pneumatic tool should only be used for loosening / tightening screws.
Oh, great for tightening screws.
Note, Ensure wires are not pinched or under screw bosses before tightening screws.
Lock it in position by tightening screws Vf from underneath the Hood . fi g.3.
When the hood has been adjusted, secure unit by tightening screws A.
The depressions 38 are made by tightening screws 41 of a particular tool shown in figure 7.
As such, the orifices 95 are more preferably threadings and the means for tightening screws.
Preferably, a bush is provided for guiding the tightening screws into said extraction holes.
When regulation or setting is at an end, the points 36 are immobilized by tightening screws 38.
This fastening can be achieved by tightening screws ( not illustrated ).
For double safety, breakable boxes 15 are interposed between the tightening screws 16 and the contact face.
Such water-proofing occurs without applying forces by tightening screws or binding with tape.
You'll also be interested in:
Examples of using Tightening
Show more
Tightening a screw with the impact driver at an
Replace packing if tightening does not stop leakage
Tightening when force and speed are desired
Examples of using Screws
Show more
The screws are provided in the literature pack
Fully tighten screws with hex wrench
Screws are visible on the burner control panel
